How to Reset balboa hot tub?
How to Reset balboa hot tub?
You can reset a hot tub control panel by switching it off, waiting for between 10 and 20 seconds and then switching it back on again. If the error signal continues on the control panel then you will need to consult your hot tub manual to see what the problem is.
How to troubleshoot a spa side control panel?
Spaside Control Panel Buttons Not Working Correctly 1 Check for moisture under glass or on contacts 2 Check cable for any rodent damage, crimping or melting 3 Clean plug-in cable connections at both ends 4 Membrane or touch pad buttons may be faulty 5 Inspect circuit board for damage and correct power output 6 Replace topside control
What does the topside Control Panel on a hot tub do?
And that’s all the topside control is – a control panel, think of it as a remote control for your hot tub, wired into your spa controller, which is really the brains of the spa system. The spaside control panel, it’s just a convenient way to turn things on and off, and view equipment status lights and water temperature.
How do I change the spa to standard?
The Economy icon will be displayed unless the mode is changed. Pressing the ‘Pump 1’ button will change the mode to Standard and display the Economy-in-Standard icon. The spa will automatically revert to Economy mode after one hour (or instantly if you press ‘Mode/Prog’).
How to tell if a spaside control panel is bad?
The best way to see if a topside control is bad, is to plug in another one and see if it works. Since spaside panels are not returnable, this entails some risk on the spa owner. But there are some ways to reduce the risk… read on.
Spaside Control Panel Buttons Not Working Correctly 1 Check for moisture under glass or on contacts 2 Check cable for any rodent damage, crimping or melting 3 Clean plug-in cable connections at both ends 4 Membrane or touch pad buttons may be faulty 5 Inspect circuit board for damage and correct power output 6 Replace topside control
How to check spa panel messages in Windows 10?
Common Spa Panel Messages. 1 1. Turn OFF the Power to the System and Turn it back ON again to put System into Priming Mode. 2 2. Press any “Cool”, “Warm”, or “Temp” Button to Exit Priming Mode. 3 3. After about 45 Seconds, Check for Error Messages on the Topside Panel Display. If there is No Error Message, Select “No Error Message” Below. If
What are the messages on the spa topside panel?
Read our FAQ! Here are the common spa topside panel messages that you will encounter with your spa panel. The spa topside panel messages include common diagnostic messages, operational messages, and various other messages such as reminders.
And that’s all the topside control is – a control panel, think of it as a remote control for your hot tub, wired into your spa controller, which is really the brains of the spa system. The spaside control panel, it’s just a convenient way to turn things on and off, and view equipment status lights and water temperature.