How do I get the last water out of my hot tub?

Drain your hot tub.

Turn the power to the spa off at the circuit breaker. You don’t want the pumps or jets to run while there isn’t any water in the spa.
Next, find your drainage spigot.
Attach the garden hose to the spigot, being careful not to cross-thread.
Open the ball valve on your spigot so the water can drain.

How much water should a hot tub lose per week?

Hot tubs typically lose about 1 inch of water per week. But it could be 2 inches or more if it’s frequently uncovered, always set to 104° F, or gets daily usage. Lots of factors come into play with normal hot tub evaporation. That being said, there are some baselines we can use.

What are the dimensions of a Sundance Optima spa?

The Sundance Optima Spa has an overall height of 37.5” (95.3 cm), width of 89” (226.1 cm), and length of 89” (226.1 cm). It seats 6-7 people and has a total volume of 410 gal (1552 L).

How often should I drain and re-fill my Sundance Hot Tub?

Draining, cleaning and re-filling your Sundance hot tub3 or 4 times a year will ensure you are soaking in clean, clear water and minimize the amount of time and effort spent on keeping your Sundance hot tub water in great shape. Here are some tips for you to make the process as quick and easy as possible! Before Draining Your Sundance Hot Tub

What are the instructions for the Sundance 850?

Programming Instructions Adjusting the Time of Day Changing the Filter Cycles Start Up Instructions 850 Models Operating Instructions 850 Models View Light.

What to do if the main pump is off in Sundance spa?

If debris is present, remove debris, install switch and test system. If condition still exist, replace switch.) if switch measures infinite (no continuity) with pump off, switch is OK, Turn on Main pump and measure across switch terminals for continuity. If continuity is measured, switch is OK.

The Sundance Optima Spa has an overall height of 37.5” (95.3 cm), width of 89” (226.1 cm), and length of 89” (226.1 cm). It seats 6-7 people and has a total volume of 410 gal (1552 L).

How long does it take to drain a Sundance Hot Tub?

Run Jet pumps for 2 hours (make sure all jets are running and have not been manually turned off). You will need to turn the jets back on every 20 minutes. You are ready to begin draining your Sundance Hot Tub. Once you are ready to drain your Sundance hot tub, switch the power off at the GFCI breaker.

Programming Instructions Adjusting the Time of Day Changing the Filter Cycles Start Up Instructions 850 Models Operating Instructions 850 Models View Light.