Why does my spa water go back down when I Turn Off the pool?
Why does my spa water go back down when I Turn Off the pool?
The check valve is designed to keep the water from dropping down to the pool water level in an elevated spa (which is how most pools with spas are designed). If the check valve is not working properly, water will flow back down through the pipes as gravity takes effect.
What should I do if I need to empty my spa?
In most cases you are better off turning the spa temperature down to the minimum setting and maintaining your PH & Alkalinity levels to ensure they stay within recommended readings. If for some reason you need to empty your spa for a period longer than 2 weeks we recommend the following. 1. Pipe Degreaser / Cleaner 2. Filter Cleaner 3.
Can a spa be shut down for 2 weeks?
In most cases you are better off turning the spa temperature down to the minimum setting and maintaining your PH & Alkalinity levels to ensure they stay within recommended readings. If for some reason you need to empty your spa for a period longer than 2 weeks we recommend the following.
Is it OK to leave the spa cover off?
Our recommendation is to leave the cover off for a period of time to allow the shell to dry. (As per warning instructions on the shell, do not expose the acrylic shell to direct sunlight for extended periods of time). Clean the cover and use a good vinyl cleaner to clean your spa cover.
When to put filters back in the spa?
Once the spa is empty and dry and the filters are dry, put the filters back into the spa to make sure they do not get lost over the winter. Loosen fittings.
How do I Turn my Coleman spa back on?
Turn the spa off at the time of day that you’d like one of the filtration cycles to begin. Then turn it back on again after 30 seconds. Press the “Temp Up” button and then the “Jets” button. Press the “Temp Up” button again to choose a cycle.
How long does it take to clean a spa filter?
Remove your spa filters. We recommend soaking them for 24 hours in a spa filter cleaner. Follow the dosing instruction on the label of the filter cartridge cleaner. After your filters have soaked for 24 hours, remove them from the solution, rinse them off and set them out to dry.
Why is my spa water not turning on?
The spa isn’t heating, or the water is a lot cooler than it used to be, but everything else seems operational. The water got very hot but then everything just shut down…now the spa won’t turn on, although power seems to be getting to it.