How do I fix my spa control panel?

How do I fix my spa control panel?

No Display on Topside Control Panel

1. Reset Spa Controller, power down and restart.
2. Check for condensation under display glass.
3. Check cable for crimps or any visible damage.
4. Clean plug-in cable connections on both ends.
5. Check power at Transformer on control circuit board.
6. Check power at fuse on spa control circuit board.

What is the owner’s manual for a jacuzzi?

Control Panel LED Series Hot Tub Owner’s Manual J-315, J-325, J-335, J-345 Models 6530-377, Rev. A Attention New Spa Owner! Congratulations on the purchase of your new Jacuzzi® spa! The following is a list of automated functions performed by your spa.

What’s the blow out function on a j-335 hot tub?

In J-335 and J-345 models, an automatic five minute “blow-out” function also activates pump 2 for a period of five minutes to flush all lines. Then, after five minutes, pump 2 turns off and pump 1 continues to operate for the duration of the cycle.

What are the standards for a jacuzzi spa?

Your Jacuzzi® spa is constructed to the highest standards and is capa- ble of providing many years of trouble-free use.

Where can I find the hot tub owner’s manual?

Heater Seiiations Eort 5 H Model 2 23 VA C J2 J21 J12 J14 J1 J11 J15 J13 J1 J J J J1 J5 J Heater Heater OT 1 K1 K2 K3 K4 K5 K7 K8 L HT BRN BRN L L L BRN BRN L L BRN L BRN J1 Control Panel LED Series Hot Tub Owner’s Manual J-315, J-325, J-335, J-345 Models

Control Panel LED Series Hot Tub Owner’s Manual J-315, J-325, J-335, J-345 Models 6530-377, Rev. A Attention New Spa Owner! Congratulations on the purchase of your new Jacuzzi® spa! The following is a list of automated functions performed by your spa.

How big is a jacuzzi spa control panel?

Jacuzzi® Spa Topside Control Panel 6600-440 is a 2 pump control panel with LED readout for J-LX And J-LXL Series Spas. JHT. Topside is 7 1/4 inches wide and about 3 inches tall. It is 1 7/16″ thick (and the edge is about 1/2 inch thick). This item GQ24940 replaces BG81940.

In J-335 and J-345 models, an automatic five minute “blow-out” function also activates pump 2 for a period of five minutes to flush all lines. Then, after five minutes, pump 2 turns off and pump 1 continues to operate for the duration of the cycle.

What to do if your hot tub control panel is not working?

Examine the panel to see if any moisture is inside the display. See if the panel or any buttons are cracked or if it could have possibly gotten wet. If only part of the control panel is not working, check for any blinking lights or error messages.