How DO I know if my hot tub control panel is bad?

Spa Control Panel Displays Incorrectly

Error messages or error codes may indicate the problem.
Flickering display may indicate low voltage from transformer.
Partial display may indicate dirty contacts or moisture.
Blinking lights or flashing — indicates a system reset is needed.

How to troubleshoot a spa control panel problem?

Reset the control panel if it only displays dashes and not error messages. Turn the power off for one hour and then turn it back on. If the control panel is displaying strange messages or have lights blinking at the same time, it could be a software issue with the circuit board. Check if there is corrosion or condensation.

How to troubleshoot hot tub and spa equipment pack?

Using volt meter on a minimum 240 volt scale (120 on a 120 pack) check to see whether the power coming in is enough to power the pack: 210-240 on 240v, 110-120 on 120v. If not, have an electrician look into it. On 240v observe contactor or heater relay.

What does low speed pump and heater do for spa?

If water temperature drops 20ºF below set temperature, low speed pump and heater activates to bring temperature within 15º of set temperature. Freeze condition. 55ºF detected. Low speed pump and heater will activate until spa reaches 65ºF. High temperature condition, has reached 110ºF. Do not enter the spa.

Why does my hot tub pump need to be replaced?

Unplug it from the circuit board. If the pump or any other device no longer comes on by itself, then the topside control is faulty and needs to be replaced. The issue is most likely a faulty topside control by moisture entering the topside. The topside control will need to be replaced. The issue is most likely a faulty topside control.

Why is the increase button on the spa pump not working?

Sundance series 880 spa temperature increase button does not work. All other panel functions work. John if the decrease button works and the increase button does not you could have a bad topside control. Check the ribbon cable for breaks.

Can You troubleshoot a hot springs pool pump?

Troubleshooting a pump is a no-brainer for many, but if you have any doubts of what to do, then call the professionals here at Hot Springs Pools & Spas! We care about your safety first and deal with spas on a daily basis, so we can identify a problem quicker than a regular handy-man.