How do you reset the salt reading on Aqua Rite?
How do you reset the salt reading on Aqua Rite?
To reset, move the switch to ‘Off’ and then back to ‘Auto’. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to ‘Super Chlorinate’ and back to ‘Auto’. It takes about 30 seconds for the unit to settle back on the default reading.
What should the salt level be on my chlorine generator?
Your chlorine generator is still producing chlorine at the moment, which is a good thing. This is more of an indicator light than anything else. The salt level is 2300 ppm or less and no chlorine is generating. Step 1: Check your system to confirm that you have programmed the correct cell size.
What should the salt level be in an inyopool?
Step 2: Verify the accuracy of the salt readings (2700-3400 ppm) with an independent test kit or by taking a water sample to your local pool store for testing. 3200 ppm is the ideal level. If the salt level is below range, add enough salt to achieve a salt level of 3200 ppm. If the salt level is within range, go to Step 3.
Is it possible to reset the salinity of a salt generator?
It is not possible to recalibrate the salinity reading in any of the Goldline/Hayward salt generators you can reset the average salt level however over time the salinity will go off again within a short time frame. The reason for this is that the units take a salt reading several times a day or when you do the instant salt check.
What should salt level be on Hayward Aqua rite?
Press and hold the diagnostic button for 3 to 5 seconds. The LED light should go out. Your salt level is between 2500-2600 parts per million (ppm). Your chlorine generator is still producing chlorine at the moment, which is a good thing.
Your chlorine generator is still producing chlorine at the moment, which is a good thing. This is more of an indicator light than anything else. The salt level is 2300 ppm or less and no chlorine is generating. Step 1: Check your system to confirm that you have programmed the correct cell size.
Step 2: Verify the accuracy of the salt readings (2700-3400 ppm) with an independent test kit or by taking a water sample to your local pool store for testing. 3200 ppm is the ideal level. If the salt level is below range, add enough salt to achieve a salt level of 3200 ppm. If the salt level is within range, go to Step 3.
What should the salt level be on AquaLogic?
It can take a long time to get an up-to-date response or contact with relevant users. HELP… GENERIC T-15 SALT CELL SAYS NO SALT ALTHOUGH LEVEL IS ACTUALLY 3000
It is not possible to recalibrate the salinity reading in any of the Goldline/Hayward salt generators you can reset the average salt level however over time the salinity will go off again within a short time frame. The reason for this is that the units take a salt reading several times a day or when you do the instant salt check.