How to simplify or supplement existing instructional materials?

Rewriting instructional materials in a simplified format. Providing summaries, graphic organizers, or outlines of instructional materials. Developing study guides to provide support before, during, and after reading. Shortening reading or math assignments. Adjusting the pacing of assignments to allow for rereadings.

What’s the best way to replace screen material?

Press the Spline into the Frame. Unspool a length of spline and install it by pressing it into the frame’s groove using a rolling spline-tool (Image 1). Gently pull the spline tight with one hand as you carefully press it into the groove with the roller (Image 2). As the spline goes into the groove, it helps pull the screen taut.

How to remove thermal interface material ( TIM )?

Wait for a while until the alcohol dry/dissipate before installation/reinstallation of the processor. Dip the wiper in the isopropyl alcohol and gently remove the TIM from the bottom of the processor. Wait for a while until the alcohol dry/dissipate before installation/reinstallation the processor.

What are some examples of supplementing existing materials?

Supplementing existing materials involves the use of alternative materials to help students master the same content or skills presented in the general curricular materials. Such adaptations include using: Direct experiences. Films or videotapes. Computer software. Simplifying or supplementing existing materials can be time consuming for teachers.

How can I replace the fabric on my awning?

To view a fabric replacement for an awning without a lock, check out the video in this step. If you don’t have a locking mechanism, you can continue on the left/back side of the awning. Remove the bolt holding the arm to the bracket, then remove the arm from the roller itself.

What should I do when I have to replace my roof?

Install the ridge vent. This continuous vent along the peak of the roof will help air circulation in the attic space and can be integral in exhausting hot air and preventing winter ice dams. Ridge vents may not be included on older roofs, but installing them is a good idea whenever a house is re-roofed.

What should I put on my roof to keep it from melting?

Install ice dam protection in regions that require it: The ice guard membrane is a synthetic waterproof barrier material designed to prevent melting ice from backing up under the shingles and penetrating through the sheathing, where the moisture can cause severe damage.