Why is my slide out motor not working?

RV Slide Motor not Working. The bad news is that one of your slide out motors may have died. The good news is that the failure is due to a faulty wire or connection which caused a short and tripped a breaker. The latter may not be the case if you have 2 motors on your slide out and one is still working.

Is there an electrical problem with the slide out?

Finding an apparent electrical button, the control panel was removed and the wires for the stuck slide were placed on another slide “in/out” button. Again, there was no power to the stuck slide when the “In” was pushed. The two young mobile repair techs were now perplexed and did not have the skill to trouble-shoot the electrical issue.

What should I do if my slide out goes out?

If all else fails, slide outs, whether hydraulic or electric, have manual overrides in case of mechanical failures. You will likely need to disengage the brake assembly in order to move the slide out. Look in your owner’s manual to find out the location of the manual override, brake assembly, and any tools needed.

Are there any problems with the slide out on an RV?

Troubleshooting RV Slide Out Problems: One main problem with slide outs is that they may get out of alignment. The good news here is that each slide can be adjusted separately. All you have to do to fix it is take your RV to a dealer and let them make an adjustment.

What to do if you have a slide out problem?

One of the first things you need to so when you are having slide out problems is to check the simplest items to fix first. After all, you may find that your problem is only a loose nut, bolt or wire. Instead of spending hundreds of dollars at the dealership you can fix these simple problems yourself.

What kind of power do you need for a slide out?

The slideout pathway should be clear from tables, people, trees, electrical posts, etc. You have enough power supply. RV’s slideout system is operated by a 12 volt DC electric motor and you need to make sure that you supply it with enough power through a converter or a fully charged 12-volt battery. Your vehicle is leveled.

What does it mean when slide outs don’t slide?

This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins. Although it’s pretty rare, there’s a chance they could both be broken.

What to do if your slide out slides are crooked?

To solve this issue, you can remove some of the carpet and replace it with slide out slickers. Or you can shim your slide out slides with thing, 1/4” thick, aluminum flat stock. With the latter method you can interchange the metal and thickness to fit your situation.

What to do when the slide out doesn’t slide?

A stray item wedged in your slide out can be an easy fix, so go check before tearing your motorhome apart looking for the slide motor. You’ll definitely hear the motor laboring if this is the problem, so make sure to keep an ear out for odd sounds too!

Do you need to replace the slide out valve?

If you do not get any power at the pump then you need to replace the switch. But if the pump is running and your slide out is not moving in, then there maybe a problem at your retract valve. If it is broken or damaged, just unscrew it and replace it with a new one.

What to do if your slide out is not working?

But if the pump is running and your slide out is not moving in, then there maybe a problem at your retract valve. If it is broken or damaged, just unscrew it and replace it with a new one. Also, check your wiring to make sure there are no loose connections or broken wires and connections.

What to do if PowerPoint is not in use?

If PowerPoint is not in use by another process, continue to the next step. While add-ins can enhance your experience, they can occasionally interfere or conflict with PowerPoint. Try starting PowerPoint without add-ins to see if the problem goes away. Here’s how: Do one of the following:

What happens when you push the slide out button on an RV?

If your RV or motorhome doesn’t have the juice, your slide outs aren’t going to budge! If you push your slide-out button and nothing happens, double check to make sure that the path of the slide out is unobstructed.

Why does bodyslide not work on Windows 10?

I found that this does not work well with MO because Windows’ permissions system does a lot to protect that folder. This creates problems with BodySlide, and also other programs like FNIS, when it tries to write files. Moving Steam to C:\\Games\\Steam\\ solved a lot of issues there.

Why is my power converter not working in my RV?

Your problem my be in one of the following: the converter, your power cord, the wires that connect your power cord to the converter, or the power transfer switch. CAUTION: Never work on a converter or a power transfer switch while it is connected to live power unless you are skilled in electrical trouble shooting. Don’t risk injury or your life.

It apparently has 2 motors which are synchronized to work each end of the slide when I press the extend or retract button. One of the two motors stopped working. My Thor motorhome manual does not show a fuse for the motors in the fuse panel. (1) Is there a fuse for these motors & if so, where will I find them?

What to do when slide outs don’t move?

Make sure the house batteries are charged completely, or if at all possible, plug your RV into shore power. This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins.

Why does my slide out on my RV stop working?

Leaks are a common issue for RV slide out. Slideout seals become less and less durable due to weather conditions and general wear and tear. If they stop working, the moisture may get inside causing all kinds of problems, including a possible growth of mold or worse, an electric problem.

Why is my Lippert slide out not moving?

He explains that when the Lippert slide-out motor runs but the room doesn’t budge, the the synchronizing cylinder that pushes and pulls the room is likely jammed. He talks about the possible causes of the jam, and tells you how to troubleshoot the system to get it working again. With Dave’s help, your slide room will be moving again in no time!

What kind of car slide does not open?

2010 cougar: hear the motor working but it does not extend the slide. I own a 2010 Couger SAB 318. The Living Room Slide will not open. You can hear the motor working but it does not extend the slide. Just a … read more Vocational, Technical or Tra… I just bought a 2006 Forest River Lexington 283GTS with three slides.

What to do if your slide won’t go out?

Just took out of storage and put electricity to rv. Lites come on but AC won’t st … read more customer who has a trailer out.. They are having a problem I have a customer who has a trailer out.. They are having a problem with the slide. They had to add wood on the front jack to level it out. When they press the switch to let the slide out.

Why are the slides on my Winnebago journey not working?

2004 Winnebago Journey two slides. Neither slide will move all of sudden. Not sure how to trouble shoot this ? If you have multiple slides not running it is best to start with the batteries. They could be low or weak. Slides take a lot of power and if you have weak batteries they won’t run at all.

Why is my passenger side slide not retracting?

My trip to Baton Rouge for LSU football this past weekend went to heck when my passenger side slide would not retract (we stayed Thursday night in Lake Charles, LA to visit my son’s family). After calling a couple of Lake Charles RV repair shops, the initial thought was the slide motor had quit working.

Are there any problems with the Winnebago slide out?

But the most upsetting part is your Winnebago slide-out is having some issues you can’t figure out. So this kept you wondering how to solve Winnebago slide out problems?

Can a schwintek be used to move a Winnebago?

IMHO poor installation and poor selection of the Schwintek to move heavy slides has caused problems for Winnebago and Thor. Schwinteks do fine when moving slides that smaller, like bedroom slides. They do poorly for the large kitchen and living room slides. Those are better moved by hydraulics or larger geared electric slides.

Are there any problems with the Winnebago Thor?

Posted By: luvlabs on 09/22/15 04:15pm IMHO poor installation and poor selection of the Schwintek to move heavy slides has caused problems for Winnebago and Thor. Schwinteks do fine when moving slides that smaller, like bedroom slides. They do poorly for the large kitchen and living room slides.

Are there any issues with the Winnebago 2015 Tour?

Friends have a 2015 Tour and haven’t mentioned any issues with their slides. G-half can always find a way to do things upside-down, inside-out or backward. It’s his Super Power! Posted By: luvlabs on 09/22/15 04:15pm IMHO poor installation and poor selection of the Schwintek to move heavy slides has caused problems for Winnebago and Thor.

Where are the rods that drive the slide out?

The opening is just to the left and below the yellow wire screw caps (first photo with old motor) Square rods that drive the slide bars are attached on both sides of the motor gear box (second photo with new motor). The slide-out that was stuck open is also shown below.

Why does my slide not retract after new motor?

After the new motor was installed, the slide still would not retract. The “square rods” connected to the motor were detached to assure the new motor was functioning. We found that power to the motor existed only when the “out” part of the slide’s in/out button was pushed. There was no power to the motor when the “in” side of the button was pushed.

What causes an RV slide out to not work?

A faulty motor or gearbox could be the problem if your RV slide-out gear system is motor-driven. In such cases, if the motor is faulty or breaks down, then the mechanism will not work. If the motor-driven gearbox system is faulty, for whatever reason, your RV slide-out will not work. Your RV slide may experience resistance as it moves in and out.

What causes a schwintek slide to not move?

If the motors are out of sync, the slide may not move at all. Othertimes just one side may move, which will cause a bind in the gears and not allow it to retract or extend all of the way. Other issues with the slide could be a faulty part, such as a burned-out motor or faulty wiring.

Is the Lippert slide out controller a problem?

A final update for my slide-out problem. The good folks at RV Masters in Houston diagnosed the problem to be a “bad” Lippert Slide-Out Controller. The “in/out” switch and relay all work fine and were not the problem. A new controller was installed and the slide out is working great again!

Are there any problems with the slide out?

Most slide out problems are not that difficult to trace and then solve. There will be those that require the help of a professional technician to repair. The key would be to get to know your system and learn when the task is beyond your abilities to handle .

Why is my slide out not working on my car?

To get back home to Katy, the power supply wires to the motor were “reversed” so the slide could be retracted so I could drive home to Katy, TX. With the power supply wires “reversed”, the slide will now not extend.

Why does my slide make a clicking noise?

The slide runs in and out hesitantly by continuously flipping the switch. When doing this I hear a clicking noise from my hydraulic jack control panel area. Are they con … read more Sprinter..rv. Lites come on but ac wont start working (makes noise

What kind of motor does an electric slide out use?

Electric slideout uses an electric motor to drive a slideout gear system in your RV or camper. This motor is powered by a 12-volt system and needs a certain amount of amps to function. If you have many devices turned on while trying to pull out the slide, you may have a problem with overwhelming the circuit.

How does a slide out work in an electric car?

An electric motor activates gears and pushes/pulls a slide-out. As long as the motor is working properly (and you have electricity) and the gears are aligned properly, everything will be good to go.

What causes a slide out on an RV?

If the meter shows that the motor is getting the proper voltage, but there is no movement, then the issue is most likely with the motor. If the motor runs but the slideout doesn’t move, you may have a hydraulic leak or another hydraulic system issue. A hydraulic system leak can be another cause of slideout problems.

How to fix lock screen slide show not working?

[Fix] Lock Screen Slide Show Feature Not Working in Windows 10 and Windows 8.1 METHOD 1: Remove and Re-add Images Folder. Go to ” Settings -> Personalization -> Lock Screen ” page and click on the… METHOD 2: Change Lock Screen Slide Show Advanced Settings. When you are on ” Settings -> …

What causes an electric slide out to malfunction?

The motor controls the gear system, which can sometimes become overloaded. Electric slide outs are usually easier to repair than hydraulic systems. Hydraulic systems use a pump to trigger a hydraulic ram. These pumps can malfunction if the fluid level is low, which may be due to a leak.

Why is my slide out not working on my RV?

You’ll need to make sure you have enough power available for the slide out to function correctly. The slide out could also be misaligned or could be blocked by something in the way. You may need to resort to manually operating your slide out, so it is best to become familiar with the process before an issue comes up.

Why is my Lippert Slide Room not working?

While the hydraulic mechanisms of a Lippert system make the slide process much easier, there might be times when your slideroom doesn’t want to cooperate. More often than not, the cause is a jammed gear or drained battery, but motors occasionally become defective, leaving your room either permanently extended or retracted.

Why is my sliding electric gate not moving?

The motor may have also absorbed some moisture. Cleaning the motor using a wire brush should get it started. However, if the motor is running, but still the gate is not moving, a part inside the motor may have broken or failed and you may have to replace it.

What kind of wires are in a slide out motor?

All that I saw were the green and yellow wires coming out of the wire bundle that connected to the motor’s black and red wires (see the motor photo above).

How does an electric slide out RV work?

Electric slide-outs center on an electric motor. The motor drives a gear system attached to your RV slide room. So, with the touch of a button, you can retract and extend your RV slide-outs. Hydraulic slide-outs use the principle of hydraulic pressure. The pressure moves actuators attached at the end of the hydraulic line to move rams.

Where is the motor on a hydraulic slide?

Some of the models have the motor directly on the gear which could be inside a compartment. In the case of a hydraulic slide, they often are tied in with the leveling jacks and are located in a compartment up front. You should have an owner’s manual showing how to manual over ride the system if it fails. If not, contact Dutchmen to get a copy.

Why is my motor mover only working on one side?

Hi, went to use Powrtouch mover on Friday. Remote control seems to be sending signal and leisure battery ok but motor only working on one side of caravan. Any ideas? Have you removed the red key and put it back in?

How does a schwintek slide work in an RV?

The slide is unique in that it uses some worm gears to make the slide out move in and out of the RV. There are motors to either side of the slide that help the slide move when you want it to move, and there’s a panel inside the RV that allows you to control the motor.

Can a slide out motor be removed from an RV?

If it is a through frame slide out, you can remove the actuator arm from the motor and the mount on the slide out. Once the actuator arm is removed, the room can be slid in with the help of some other people. Do not travel with the arm off though, you would have to add supports inside to prevent the room from extending.

What causes a slide out to not retract?

With that being said, the biggest issue with slide-outs doesn’t have anything to do with the extension/retraction process. It has to do with seals, the rubber gaskets that surround a slide-out and keep the elements at bay. Improperly installed seals can pull loose and affect movement of the slide.

What to do if slide out motor does not work?

If you can get another person to help, one can use a multimeter down below at the problematic slide motor and the other up at the slide out switch & test to see if power is even reaching the motor when the switch is turned ON. Be careful… don’t get shocked or pinched under the MH. Was this answer helpful? Thanks for your advice.

What happens when your slide out won’t slide out?

A stubborn slide-out, though, can turn your trip in to a disaster. Either you spend your days climbing over furniture in an attempt to live in an RV with the walls pushed in or you can’t depart for home with a slide-out that refuses to retract for road travel.

Why is my slide out not working in my RV?

Let’s start with the simple and easy to test causes before moving onto the more complicated items Whether hydraulic or electric, your slide out compartment will require power from the RV battery. If pressing the switch doesn’t trigger any sound or movement, the electrical system will be the right place to start testing.

How to troubleshoot the Lippert electric slideout system?

TROUBLESHOOTING The Lippert Electric Slideout Systemis only one of four interrelated slideout room system components. These four components are: chassis, room, coach, and Lippert Electric Slideout System. Each one needs to function correctly with the others or misalignment problems will occur.

How many Lippert slide out motors are there?

14 in stock! 14 in stock! 27 in stock! 16 in stock! 13 in stock! 18 in stock! 20 in stock! 6 in stock! 17 in stock! 6 in stock!

All that I saw were the green and yellow wires coming out of the wire bundle that connected to the motor’s black and red wires (see the motor photo above).

How much does it cost to fix an RV slide out?

All of these problems should not stop you from manually sliding the slide out in and out. Then if it is a broken gear in the motor, it may cost you about $800 to fix, depending on your dealer or repair shop. Hopefully, your warranty is still valid and you are covered. If not you may want to try to fix it yourself.

How much does it cost to replace a slide out topper?

That cost may go up if you have some damage to repair along with replacing the seals. Other estimates have been around $1,000 to replace your seals. Your actual cost will depend on you and the decisions you need to make. Tip #4: To protect your seals and help them last a lot longer, you may want to use slide out toppers.

What kind of motor does a slideout use?

Slideout electrical is mainly powered by a particular electric motor driving a gear system. They are intended on lighter and smaller slide outs. They should not be overloaded for them to work effectively. Engineer and integrate them into the RV properly.

Is there a replacement motor for a disco slideout?

All disco owners are in sympathy with you and would all say the replacement motor is worth the $. On the Disco, the driver side slide fits flush to the floor when extended. The three men are getting it over the ramp to retract. There is a replacement motor with higher torque available.

Where can I buy a slideout gear controller?

Why is my RV slide not going all the way out?

RV Slide will Not Go all the Way Out Most RV problems can be solved by looking for simple obstacles or obstructions first. If this problem is happening to your kitchen slide out then you may have some plumbing lines or other kitchen equipment in the way.

Why does my slide out keep blowing fuse?

RV Slide out Keeps Blowing Fuse. One of the signs that comes with a blown fuse is that there may be a short in the wiring at some point. This may take some time to track down due to the amount of wiring slide outs have. There also may be an internal fault in the controller.

What to do if your slideout does not move?

According to Lippert, over 90% of slide motor anomalies occur on the negative side of the circuit. If the slideout does not move when first energized, check the 12-volt DC system first.

Are there any issues with an electric slide out?

With electric powered units you can have issues with the motor, the gears, a lack of electricity or they blow a circuit or two. Among other things. The hydraulic system is not perfect either. You can develop an unseen leak in the hydraulic lines that drains your hydraulic fluid. Plus, the pump or motor may malfunction.

What do you need to know about schwintek slide out?

1. Check for proper connections between the motors and harnesses. 2. Visually inspect the exposed harnesses to ensure they are not pinched or damaged. 3. If test harness is available, connect the test harness from the controller to the motor and try to operate the slide-out using the normal switch. 4.

What are the common problems with fifth wheel slide outs?

Each slide-out operating system has its own unique problems. Check out the following common problems with slide-outs on a fifth wheel. A faulty motor or gearbox could be the problem if your RV slide-out gear system is motor-driven. In such cases, if the motor is faulty or breaks down, then the mechanism will not work.

How to troubleshoot a Lippert slide out motor?

The motors are usually held on with one or two bolts on the sides going to the actuator. Sometimes the bolt on top can be hard to reach and the actuator may have to be unmounted to gain access. If there is an extension for the manual crank, that will have to be removed as well.I hope this helps!

Is there no power at the slide out wall switch?

There is 12v at the motor, when switch engages it drops to zero. Running power to the … read more I have 5 electric slides and one won’t work. The fuses all I have 5 electric slides and one won’t work. The fuses all look fine. … read more Vocational, Technical or Tra…

Are there two relays for the slideroom motor?

Missing a circuit to supply power to slideroom motor.The drawing pictures one relay to power the in and out voltage to the motor- there are 2 power relays.

Can a single pump be used to retract slide outs?

In either instance you will probably find yourself at the mercy of an RV repairman, who may or may not have the parts needed for a quick repair on hand. Also, due to the inherent power of hydraulics, a single pump/motor is often used to extend/retract all slide-outs. When it works, you’re golden.

How to install a hydraulic through frame slideout?

Rev: 07.09

How do you align slide out drive shaft?

Tap on that lightly with a mallet while sliding the drive shaft if necessary. Disengaged slide-out rail gear. Once the idler rail gear is off the rack, both rails can be synchronized by manually moving the disengaged side until the room is aligned properly.

What does it mean when your slideout is out of alignment?

There is. The technical term for describing our slide being out of alignment is: the rails are out of synch, or the gear timing is off. So, technically speaking I adjusted the timing of the rails supporting our slideout to realign the room.

What to do if your coachmen won’t slide out?

Coachmen slideout won’t slide out, Coachmen slideout won’t slide out… Coachmen slideout won’t slide out, how can I fix this? In a camp ground champion, pa. Show More Show Less Ask Your Own RV Question Share this conversation Answered in 5 days by: 10/16/2014 RV Mechanic: Robert, RV Mechanic replied 6 years ago Robert, RV Mechanic Category: RV

What to do if your slide out gets stuck?

If your slide out gets stuck and has problems extending or retracting, there are some straightforward ways to determine the problem. First make sure the slide out isn’t locked in position, then determine if there is a power supply problem.

What happens if you push the slide out button?

If you push your slide-out button and nothing happens, double check to make sure that the path of the slide out is unobstructed. A stray item wedged in your slide out can be an easy fix, so go check before tearing your motorhome apart looking for the slide motor.

Are there any problems with the Keystone bullet Premier?

Very poorly built, with the cheapest parts.. stuff like fresh water tank leaks from up on top the tank, the trim all throughout the camper falling off, roof leaks after six months, hot water tank problems, slide out seal fell off, awning leaks alone camper, and the list goes on….. I will not be buying another one from keystone.

An electric motor activates gears and pushes/pulls a slide-out. As long as the motor is working properly (and you have electricity) and the gears are aligned properly, everything will be good to go.

What causes an RV to slide out of a jam?

Overloaded motors can also cause significant issues for your RV to slide out. If there is a jam or some kind of mechanical issue, your motor may experience resistance and will try to draw extra energy to complete its task. If it’s stuck this way long enough, it is just going to break down.

How do you move a slide out in an RV?

You will likely need to disengage the brake assembly in order to move the slide out. Look in your owner’s manual to find out the location of the manual override, brake assembly, and any tools needed. The only challenging part might be locating the brake assembly which you will likely need to disable in order to move the unit.

What causes a hydraulic slideout to stop working?

Overview A common problem with hydraulic slideouts is that when the switch is pressed to extend or retract the slide, movement starts, then stops, then starts, then stops. There may be a few seconds

What to do when your slide out won’t slide out?

At this point, a working electric motor will serve no purpose and you will soon be getting your cardio workout for the day as you attempt to muscle your slide-out back in manually –against its will. Most systems today have an emergency manual override where you use a hand crank (or electrical drill) to extend/retract the slide-out.

How does a hydraulic slide on a pump work?

How the Hydraulic Slide Works When the rocker switch in the control panel is pressed and held to either extend or retract the slide(s), 12V DC power is applied to the motor in the hydraulic pump assembly.

Why is my Lippert slide out not working?

You may also find that something’s gone wrong with other components of the mechanism, and you can tell whether this is the case if you hit the switch and the Lippert slide-out motor runs but the room doesn’t budge. This is an indication that there’s an obstruction in the hydraulic system.

When to replace a Lippert slide out motor?

Any assistance would be appreciated, esp as to where we can get replacement parts, etc. If you have voltage to the motor when the switch is engaged, then the motor will need replaced. Make sure it isn’t just the switch not working, this is a much cheaper replacement. You want to make sure voltage is actually being sent to the motor.

Where is the slide out controller on a motorhome?

For my motorhome, there are two slide out controllers attached to the “roof” of the middle basement compartment between the two main beams of the frame. One controller for the passenger side slide-out and one for the drive side slide-out. RV Masters charged $130 for the new controller and $140 for an hour of labor to install the controller.

Missing a circuit to supply power to slideroom motor.The drawing pictures one relay to power the in and out voltage to the motor- there are 2 power relays.

Can a slide out on an RV fail?

But electrical RV slide-out systems can, and do, fail. The time to learn to troubleshoot a slide-out problem is not in a campground with a fully extended slide-out. Take the time to learn how to manually open the electric slide-out on your travel trailer. Park the trailer in an area clear of obstructions.

Where is the slide out motor on a mower?

Find the slide-out motor. The motor is located beneath the slide-out room. Refer to the owner’s manual for the exact location. Remove the brake assembly from the motor.

How does a Jayco slide out motor work?

The manual override will be done at the motor. There is usually a nut or bracket at the end of the motor to be able to operate it with a wrench or socket. Jayco usually uses 5/8″ sockets to operate their slide outs. There should be an access panel to the motor underneath or in a compartment.

How does a Lippert slide out motor work?

You find the ideal spot to set up camp after a long drive, and you go to extend your slide room so you can move comfortably throughout your RV. You activate the Lippert slide-out motor, and although it seems to be fully functional, the room inches out slower than normal. All you want to do is kick back and relax, but the room is taking its time.

What kind of slide out motor does Newmar use?

ROOM. Front O/_H White DRIER’S KSDP. VTDP. DSDP, ATME PASS. SLIDE- BEARING OUT MECHANISM GEAR MOTOR “TR.e.ffORQUE- BUSHING FLAT-FLOOR ACTUATOR SLIDE- OUT OUT KITCHEN SLIDE— 9 d 16 PNK 12 REDWHT —S O 6 VIO WHT 2—SWlTC OTO ORG HT 2-SWITC 12 ED EL 6 VIO -1 -SWÍTCH

What do you call a slide out motor?

It starts out… Vocational, Technical or Tra… Vocational, Technical or Tra… 2017 Winnebago vista. Slide out hang up on one side when 2017 Winnebago vista. Slide out hang up on one side when going out or in. Not under warranty. Replaced slide out motors harness, checked … read more

What does it mean when your solenoid clicks?

It sounds like the ground isn’t the issue because you bypass that with the cables and still have the clicking of the solenoid # LC118246. It sounds like the solenoid has gone bad and needs replacing.

Why do I hear a clicking sound on my trim motor?

A lot of engines pull the high amp positive off of starter and then feed it through a circuit breaker. If the circuit breaker pops you can hear clicking but not get any power to trim motor. I opened the coweling and broke out my OEM service manual.

Why do I hear a click when I press the power button?

3) With point 2, I notice that when the engine runs the battery is getting ‘charged’ up to 16 volts. I noticed in the OEM service manual that this indicates (almost without question) the voltage regulator is bad and needs to be replaced.

Where are the slide controllers on a coach?

Different coach but my slide controllers are behind a panel that holds my cable/sat input in one of the bays. I have electric motors also that look identical to yours. Mine are Kwikee but like stated all owned by Lippert now. On my motors there is a 3/4 inch nut and also on the motor is a “lock” switch.

Why does my slide not retract all the way?

However, Ian says the most common one is out of sync slide-out electrical motors. If the motors are out of sync, the slide may not move at all. Othertimes just one side may move, which will cause a bind in the gears and not allow it to retract or extend all of the way.

Why does my fifth wheel slide out not work?

Check out the following common problems with slide-outs on a fifth wheel. A faulty motor or gearbox could be the problem if your RV slide-out gear system is motor-driven. In such cases, if the motor is faulty or breaks down, then the mechanism will not work.

Find the slide-out motor. The motor is located beneath the slide-out room. Refer to the owner’s manual for the exact location. Remove the brake assembly from the motor.

Where are the motors on a Lippert slide out?

Most likely you have a schwintek slide system or slim rack. These will have two motors in the walls at the top corners of the slide. If one side is moving and the other isn’t, there is an issue with the motor or the harness to the motor.

How to open a slideout RV without electric?

Question: How do you open a slideout RV without electric? Answer: It depends on the type of slide room you have. Some have manual controls you can use. If not, I suggest you call a locally located professional to come out and assess your situation and then fix the problem for you.

Is it safe to have a slide room in a motor home?

Slide rooms offer some nice perks such as luxury and comfort, but they can be unsafe and may have other types of problems as well. Until recently, a 1999 or newer motor home or camper came with at least one slide room because they were standard equipment.

What kind of motor do I need for a slide out?

9,500 RPM 30A 18:1 Venture Actuator Motor for Lippert Slide-Out Systems (132682) by Lippert®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers…

Which is power gear slide out MOTOR pin?

Motor Assembly with Pin for Kwikee Slide-Out Motors 130-1119/13-1127/521292/521748/523046 (386322) by Power Gear®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology…

What kind of motor is in a Kwikee slide out?

MX2 Motor Assembly with Pin and B-Connector for Kwikee Slide-Out Base Motor 1510000006 (368202) by Power Gear®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology… Motor Assembly with Pin for Kwikee Slide-Out Motors 13-1126/521654 (386141) by Power Gear®.

Can a slide out motor on an RV go bad?

The mechanism of the slide-out system often results in various electrical problems. This is particularly true for electric slide-outs where the electric motor can go bad or become overloaded. If you’re looking for a high-quality RV slide-out motor to get your slide-out back in action, you’re in the right place!

Why do I have trouble retracting my slideout?

I don’t know a lot of the details, but it turned out that at the end of the stroke, the slide out dropped so that one of the rack and pinion sets changed center distance enough that the gear teeth disengaged. The retracting load would then fall on only one set of gears thus causing the slideout to skew and bind.

His slideout operated with an electric motor driving 2 parallel rack and pinion sets from a single shaft. I don’t know a lot of the details, but it turned out that at the end of the stroke, the slide out dropped so that one of the rack and pinion sets changed center distance enough that the gear teeth disengaged.

How to manually retract an RV slideout in its extended?

Gary Bunzer, the RV Doctor, explains how to manually retract an RV slideout that is stuck in its “out” position. Upload, livestream, and create your own videos, all in HD.

What do you need to know about electric slide out?

Simply take the crank handle (through-frame models) or wrench, ratchet or drill with a nut driver (in-frame models) and rotate it clockwise to retract and counterclockwise to extend slide-out. It is important to note that you DO NOT need to attempt to disengage the motor as the actuator is “manual ready” Just hook up and crank.

Why is my slide out wall switch not working?

Hence, no power to the wall … read more My slide out switch don’t have power, the slide out 40amp brake does the wires. Coming from their the wires does it goes on the walls but can’t find it … read more Dining Room slide is not working. Absolutely nothing happens Dining Room slide is not working.

Why does my slide out brake not have power?

My slide out switch don’t have power, the slide out 40amp brake does the wires. Coming from their the wires does it goes on the walls but can’t find it … read more

The hedgehog was engaged in a fight with

Why is my slide out motor not working?