What is the error code for indoor fan lock?
What is the error code for indoor fan lock?
CH 10: Indoor Fan Error. Indoor fan lock error is occurred by no feedback signal from Hall sensor located BLDC Motor in 50 seconds delay time or feedback signal lower than 50RPM. (Applied in model using BLDC Motor) CH 34: High Pressure Switch Error.
What are the steps to responding to a Code Red?
There are four steps to responding to a Code Red in a healthcare facility, given the acronym, RACE, which include the following: Rescue – Rescue all individuals, including staff, patients or visitors, nearest the fire.
What are the lights on the lock on the Onity card?
There are only two lights on the lock— a red LED and a green LED. Singly or in combination the lights can help diagnose a lock or explain why a card is not accepted. Below is a guide to help you understand the light codes. Valid card inserted. Invalid card inserted. Unreadable card inserted. Lock is waiting for user’s PIN.
Can a red zone be declared as a green zone?
As per the guidelines shared by the Health Ministry a Red Zone can be declared as an Orange Zone if Green Zone: This zone will see maximum easing of lockdown restrictions to bring a sense of normalcy back to the country.
Which is the correct code green or red?
Green Lock opens. Correct code entered but Deadbolt is on. Green, then Red. Lock does not open. Battery is low. Green and Red flash simultaneously each time a key is pressed. Lock opens. Battery is completely dead. No light Lock does not open and willnot open until battery is changed. Correct code entered but time in lock is invalid
What does Code Red mean in school lockdown?
Lockdown Codes and Procedures CODE RED – “Students and staff, we are in a code red. Please lockdown now.” This means there is an immediate threat to the school. This is a complete classroom and school lockdown. Move all students, staff and identified visitors into the nearest classroom, office or secure room.
What is the correct code for no light lock?
Correct code entered but Deadbolt is on. Green, then Red. Lock does not open. Battery is low. Green and Red flash simultaneously each time a key is pressed. Lock opens. Battery is completely dead. No light Lock does not open and willnot open until battery is changed. Correct code entered but time in lock is invalid
What happens at the end of a code yellow Lockdown?
The lockdown is over and normal school activities are resumed. A mandatory staff meeting will be held at the close of the school day after a Code Red incident. A staff meeting after a Code Yellow incident will be at the principal’s discretion. Things of Note: Every classroom should have two sets of red, yellow, blue, and green cards.