What should I do if my slide out is not working?

Injuries could be caused by clothing being caught up in the gear assembly. So, this is a short “to do” list do before you start retracting the slideout: Check your driver’s seat. Make sure it is not on the way of your slideout. Just put your seat in the upright position, pull it in and you are good to go. Check your cabinets.

Why is my passenger side slide not retracting?

My trip to Baton Rouge for LSU football this past weekend went to heck when my passenger side slide would not retract (we stayed Thursday night in Lake Charles, LA to visit my son’s family). After calling a couple of Lake Charles RV repair shops, the initial thought was the slide motor had quit working.

Why is my slide out not working on my RV?

You’ll need to make sure you have enough power available for the slide out to function correctly. The slide out could also be misaligned or could be blocked by something in the way. You may need to resort to manually operating your slide out, so it is best to become familiar with the process before an issue comes up.

Is there an electrical problem with the slide out?

Finding an apparent electrical button, the control panel was removed and the wires for the stuck slide were placed on another slide “in/out” button. Again, there was no power to the stuck slide when the “In” was pushed. The two young mobile repair techs were now perplexed and did not have the skill to trouble-shoot the electrical issue.

What happens when your slide out won’t slide out?

A stubborn slide-out, though, can turn your trip in to a disaster. Either you spend your days climbing over furniture in an attempt to live in an RV with the walls pushed in or you can’t depart for home with a slide-out that refuses to retract for road travel.

What causes a hydraulic slideout to stop working?

Overview A common problem with hydraulic slideouts is that when the switch is pressed to extend or retract the slide, movement starts, then stops, then starts, then stops. There may be a few seconds

What causes an electric slide out to malfunction?

The motor controls the gear system, which can sometimes become overloaded. Electric slide outs are usually easier to repair than hydraulic systems. Hydraulic systems use a pump to trigger a hydraulic ram. These pumps can malfunction if the fluid level is low, which may be due to a leak.

What to do when slide out room actuates?

1. Parking locations should be clear of obstructions that may cause damage when the slide-out room is actuated. 2. Be sure all persons are clear of the coach prior to the slide-out room actuation. 3. Keep hands and other body parts away from slide-out mechanisms during actuation.

What kind of power do you need for a slide out?

The slideout pathway should be clear from tables, people, trees, electrical posts, etc. You have enough power supply. RV’s slideout system is operated by a 12 volt DC electric motor and you need to make sure that you supply it with enough power through a converter or a fully charged 12-volt battery. Your vehicle is leveled.

Are there any lights that work but do not work?

Vocational, Technical or Tra… Our ac and lights work but the outlets do not. Our interior Our ac and lights work but the outlets do not JA: Just to clarify, what are the exact lights you’re talking about? Customer: Our interior lights work but our outlets do not JA: What is the model/year … read more

Why does my slide out on my RV stop working?

Leaks are a common issue for RV slide out. Slideout seals become less and less durable due to weather conditions and general wear and tear. If they stop working, the moisture may get inside causing all kinds of problems, including a possible growth of mold or worse, an electric problem.

What kind of switch do I need for slide out?

Magnetic switches are very commonly used for the sensor circuits stop point. (They do not fail often) The setup should have 2 high current relays – one for the extend and one for the retract function. Is the bathroom wall between the slide in question? or some other space/wall at one end of the slide.

What happens if you push the slide out button?

If you push your slide-out button and nothing happens, double check to make sure that the path of the slide out is unobstructed. A stray item wedged in your slide out can be an easy fix, so go check before tearing your motorhome apart looking for the slide motor.

What causes a schwintek slide to not move?

If the motors are out of sync, the slide may not move at all. Othertimes just one side may move, which will cause a bind in the gears and not allow it to retract or extend all of the way. Other issues with the slide could be a faulty part, such as a burned-out motor or faulty wiring.

What to do when slide outs don’t move?

Make sure the house batteries are charged completely, or if at all possible, plug your RV into shore power. This will indicate whether the problem may be the batteries or not. If you push the button for the slide outs and can hear the motor running but the slides don’t move, check the motor’s shear pins.

Why do I have an open slideout on my RV?

If you don’t have enough power coming in, you could start overworking your slideout’s motor until it overheats. This is how you will end up being stuck with an open slideout. Now, let’s get into details!

What causes a slide out pump to malfunction?

Damaged valves could be another reason for pumps to malfunction. Hydraulic lines may stall or jam, causing the rams and actuator triggers to misfire or not function at all. Not only does this cause a serious malfunction of the slide-out, but it could also be dangerous for the person operating the slide-out.

What to do if you have a slide out problem?

One of the first things you need to so when you are having slide out problems is to check the simplest items to fix first. After all, you may find that your problem is only a loose nut, bolt or wire. Instead of spending hundreds of dollars at the dealership you can fix these simple problems yourself.

Are there any problems with a slide out RV?

While RV slide-outs provide additional living space, they also come with their own share of mechanical issues and maintenance tasks. Slide outs can be prone to motor failure, misalignment, and leaks, just to name a few.

What are the common problems with fifth wheel slide outs?

Each slide-out operating system has its own unique problems. Check out the following common problems with slide-outs on a fifth wheel. A faulty motor or gearbox could be the problem if your RV slide-out gear system is motor-driven. In such cases, if the motor is faulty or breaks down, then the mechanism will not work.

How to troubleshoot an RV slide out system?

Here are a few common situations with RV’s slideout system: 1 The room does not move Check if your transit bars are removed. If not, do so. 2 The room moved and stopped If the room movement is detected, but it suddenly stops, there could be several issues: If there is an obstruction blocking the way that 3 The room moves too slow

What kind of battery does an RV slide out use?

You have enough power supply. RV’s slideout system is operated by a 12 volt DC electric motor and you need to make sure that you supply it with enough power through a converter or a fully charged 12-volt battery. Your vehicle is leveled. You need to level your vehicle before operating the slideout.

When to repair a slide out in an RV?

It really depends on your floor plan and model. If something is out of alignment, you want to have it repaired as soon as possible, to avoid further damage to the slide or other components of your RV. So we suggest you contact Fleetwood to get the specific right answer for your motorhome. Question: I have a 1999 Sandpiper with two slide-outs.

How to troubleshoot schwintek in wall slideout system?

1. Bend back wipe seal. Visually locate motor and motor retention screw. Remove the screw (Figs. 4, 5 and 7). 2. Pull the motor up until disengaged. Replace the motor retention screw to hold the motor in this position (Fig. 6). 3. Repeat this process for both sides of the slide room. 4.

What causes a slide out to not retract?

With that being said, the biggest issue with slide-outs doesn’t have anything to do with the extension/retraction process. It has to do with seals, the rubber gaskets that surround a slide-out and keep the elements at bay. Improperly installed seals can pull loose and affect movement of the slide.

Why is my slide out not working in my camper?

What to do if your laser pointer is not working?

If the drivers are up to date, it’s plugged into a powered USB port, and it is still not working, restarting the machine with the USB receiver plugged in usually helps. Otherwise check the batteries. You can check if the batteries need replacing if the built in laser pointer does not work.

What to do if your slide in oven is not working?

Check circuit breakers/fuses and power cord. On most slide-in and free-standing ranges, it will be necessary to pull out the lower drawer to access the plug and verify is connected securely (for others, sliding the appliance out from the wall would be necessary). If the power cord is connected securely, your oven may be wired improperly.

Why is my slide out motor not working?

RV Slide Motor not Working. The bad news is that one of your slide out motors may have died. The good news is that the failure is due to a faulty wire or connection which caused a short and tripped a breaker. The latter may not be the case if you have 2 motors on your slide out and one is still working.

Why is my Lippert slide out not working?

You may also find that something’s gone wrong with other components of the mechanism, and you can tell whether this is the case if you hit the switch and the Lippert slide-out motor runs but the room doesn’t budge. This is an indication that there’s an obstruction in the hydraulic system.

What to do if your slide out is not working?

But if the pump is running and your slide out is not moving in, then there maybe a problem at your retract valve. If it is broken or damaged, just unscrew it and replace it with a new one. Also, check your wiring to make sure there are no loose connections or broken wires and connections.

How to troubleshoot the Lippert electric slideout system?

TROUBLESHOOTING The Lippert Electric Slideout Systemis only one of four interrelated slideout room system components. These four components are: chassis, room, coach, and Lippert Electric Slideout System. Each one needs to function correctly with the others or misalignment problems will occur.

The hedgehog was engaged in a fight with

What should I do if my slide out is not working?