How much does a mechanic charge to replace an alternator?

The Best in Auto Repair The average cost for alternator replacement is between $568 and $737. Labor costs are estimated between $120 and $152 while parts are priced between $448 and $585. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.

How long does it take for a mechanic to replace an alternator?

about two hours
In general, it will take about two hours for you to replace an alternator on your own, though this could vary somewhat depending on your knowledge of car mechanics. If you take your car into a shop in order to have the alternator replaced, timing may vary somewhat, and you may have to leave the car for the day.

Can a mechanic fix an alternator?

If you experience problems with your car battery or can’t start the car, there is a good chance that you have a problem with your alternator. You most likely need to have it serviced by a professional mobile mechanic.

Can an alternator be fixed or does it have to be replaced?

It doesn’t need any maintenance and only needs to be replaced if it stops working or if there is some other problem with it. How long does the alternator last? On average, an alternator fails after 100,000-150,000 miles. In cars that are driven daily, an alternator tends to last longer.

How long can a car drive without alternator?

It entirely depends on the capacity of the car battery. If the battery does not have a full charge, the vehicle may run from 5 to 30 minutes. The runtime will increase in case of a fully charged battery.

Is replacing an alternator expensive?

Most vehicles will fall into the $350-400 range for the total job of alternator replacement if no other parts need to be replaced. If the serpentine belt gets tacked on, add another $20 to $50 to your bill. If you decide to go with dealership parts and labor, expect the bill to climb over $500 in many cases.

Can I replace alternator myself?

Replacing an alternator can cost you several hundred bucks at the local repair shop, but it’s one of the simplest repairs you can do at home. With a few tools and about an hour you can swap it out yourself — and keep your dough in your pocket where it belongs.

Why does my alternator not change the voltage?

If the voltage change and go back to normal when you tap it lightly with a hammer while the car is running – the Carbon brushes are worn out and needs to be replaced in the alternator, or the whole alternator. Sometimes there is an electrical problem in the alternator, and even if the voltage does not change, it might be damaged.

What happens when the alternator of a car is dead?

The alternator and the car’s battery work hand in hand. A good battery should give you service for the next five years before its lifespan ends. If your battery is dead, then it will not give power to the car’s alternator. The alternator normally lasts longer than the battery.

How can I tell if I have an alternator problem?

To differentiate an alternator problem from the battery, you will need to use a voltmeter to check for voltage. First, turn off the engine and check the battery voltage. A fully charged battery should have a reading of 12.65 volts. Next, turn on the engine and recheck the voltage. You should have a reading of 13.5 to 14.5 volts.

What happens when the belt on an alternator breaks?

A closer observation of the alternator will reveal a pulley and belt system that works to convert mechanical energy into electrical energy. The serpentine belt powers the alternator, and if it fails, the alternator will stop working the moment your belt wears out and breaks, or the pulley becomes damaged.

How long does it take to replace an alternator?

That extra power comes from larger amp alternators that cost more to build. Repair cost aggregate websites like RepairPal show an alternator replacement averages between 1 to 3 hours of work whether doing it yourself or having a mechanic swap it out. You’ll have to factor that time into a shop’s rate.

Do you have to loosen the V belt before replacing the alternator?

If you have a V-belt, the alternator must first be loosened before the V belt can be removed as the alternator provides belt tension. Install the new alternator, making sure that it fits properly and aligns with the existing bolt holes, by reversing the steps in the disassembly procedure.

How does an alternator change from AC to DC?

This rotor piece spins within a coil assembly known as a ” stator “, which contains wound copper coils. As the brushes pass by those stator coils, an electrical charge builds up. That charge is then sent from the coils through a voltage regulator and rectifier that converts it from alternating current (AC) to evenly-flowing direct current (DC).

How does an alternator work in a car?

When the engine is running, it spins the pulleys on the front of the engine, which are connected by a serpentine belt. That belt spins the alternator, which generates the electricity needed to recharge the battery after startup, operate electrical components like the headlights, radio, GPS, and fuel injection.