What should I do if my inverter is not working?

In such a case, the possible cause could be either overload on the inverter or a stuck cooling fan. Disconnect all the extra load in case of overload. If the problem still doesn’t get resolved, then you may have to take the inverter to the service centre or contact a professional for help.

What causes a power inverter to display a false code?

Power inverter LCD displays false codes Another common problem related to inverters which you may experience is LCD displaying false codes. In this case, either there is some internal problem in which the inverter circuit may need to be replaced or there is an external issue.

What to do when your inverter is making noise?

To fix this problem, put your ear close to the fan when your inverter is on. If it is the fan, then it may be clogged with debris. Try to clean it. If it is still making noise, try to grease it. If, after that, the noise persists, you may need to replace the fan. A noisy fan is an indication that it is not blowing your inverter properly.

Why does my power inverter keep sounding an alarm?

The alarm of a power inverter sounds as an alert. For instance, when you overload your power inverter, it will sound an alarm before shutting down. Another common fault with an inverter is a continuous sounding of the alarm without any reason. To handle this problem, you must first check the inverter.

What are the most common problems with inverters?

Another common problem related to inverters which you may experience is LCD displaying false codes. In this case, either there is some internal problem in which the inverter circuit may need to be replaced or there is an external issue. If the issue is external, then you may need to check the battery cables, the output and input wires and load etc.

Why do I get an alarm when my inverter is not working?

In some inverters, you can hear the alarm. There are reasons that the fan may have got stuck due to many reasons. So, the inverter will not get cold air, and you get the alarm. This is a rare occasion. You find very rare instances of this kind of inverter problems and solutions.

Why does my Mecer inverter not turn on?

Check the power cable and change the fuse respectively for the above given reasons for a power inverter working just in the inverter mode. However, if the cause is input protector being effective, then you must reset it.

Why does an inverter need an input protector?

An input protector is basically a protector circuit which saves the inverter in case of high voltage conditions. Some other causes for this common inverter problem include low input and high input etc.