What is the trouble code for cylinder 2?

The P0202 code is a general OBD-II diagnostic trouble code (DTC) associated with the injector circuit. Note: This code may be seen with P0200, P0201, or P0203-P0212. P0202 may also be seen with misfire codes and lean or rich condition codes. P0202 indicates that the ECM has detected a malfunction for the cylinder 2 injector circuit.

What does p0022 mean on a check engine light?

P0022 is a diagnostic trouble code (DTC) for “Camshaft Position A – Timing Over-Retarded (Bank 2)”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation. Our certified mobile mechanics can come to your home or office to perform the Check Engine Light diagnostic.

What is the OBD code for bank 2?

P0022 is the OBD-II generic code which indicates that the Engine Control Module (ECM) has determined the intake camshaft timing for bank 2 is more retarded than what the ECM has commanded it be.

What does the p0202 code on a cylinder 2 mean?

P0202 may also be seen with misfire codes and lean or rich condition codes. P0202 indicates that the ECM has detected a malfunction for the cylinder 2 injector circuit. The code is set once the ECM detects out-of-range voltage or resistance. The malfunction causes the ECM to set a Check Engine Light and a failsafe mode.

What is the fault code for a mid 128 engine?

Engine ECU Faults (MID 128) Fault Code Description FMI Codes MID 128 PID 26 Engine Fan Speed Percent 3,8 MID 128 PID 27 EGR Valve #1 Position Sensor 3,4,5 MID 128 PID 45 Preheater Relay Status 3,4,5 MID 128 PID 81 Particulate Filter 0,2,3,5,12

What does code p0022 mean on a VVT?

What Does Code P0022 Mean? In most cases if P0022 comes up it is due to lack of oil lubrication. The best way to rectify the situation is to apply an engine cleaning product and do an engine rinse before re-installing a new VCT/VVT solenoid.

What is the fault code for an ECU?

Engine ECU Faults (MID 128) Fault Code Description FMI Codes MID 128 PPID 326 Soot Level (DPF System) 0,11 MID 128 PPID 328 Aftertreatment Injection Shutoff Valve 3,4,5,7,14 MID 128 PPID 329 Aftertreatment Fuel Injector 3,4,5,7,14 MID 128 SID 254 Engine electronic control unit (EECU) 3, 8, 12

What do you call the engine code on a BMW?

Every car manufacturer assigns an internal code designation to identify their vehicles. For BMW these are known as chassis codes and engine codes. These code systems help keep planning and development organized and avoids confusion.