How do you shut off the water supply to a toilet?

Shut off water supply – Before performing the task of toilet removal, make sure the water supply is shut off. The water supply tap is normally located in the line leading to the underside of the tank. If your toilet does not have such a tap, you will have to shut off the main water line in the house. Turn the tap clockwise to close.

How do you disconnect a water supply line?

Disconnect water supply line – The next step is to disconnect the water supply line from the tank. You should see a nylon or brass fitting connecting the supply line where it enters the bottom of the tank. Using a wrench, undo the fitting turning counter clockwise.

What’s the best way to remove a toilet tank?

Take off the tank. Use a ratchet wrench or a basin wrench to remove the nuts from the mounting bolts that hold the tank onto the bowl. There will be one on each side of the tank, and there may even be a third one in the middle.

How do you remove tie down nuts from toilet tank?

Using a wrench, undo the fitting turning counter clockwise. When loose you should be able to turn the fitting by hand. When the fitting is unthreaded from the tank, gently pull down on the line separating it from the bottom of the tank. Remove tie down nuts – You are now ready to remove the tie down nuts at the base of the toilet bowl.

How do you remove a handle from a toilet tank?

Remove the mounting nut that holds the handle in place. Locate the plastic or metal mounting nut that’s holding your handle in place on the inside the top of the tank. Try twisting the nut clockwise by hand to see if you can loosen it. If not, grip the nut with a pair of locking pliers to get better leverage on it.

How do you get water out of a toilet tank?

Watch this short video or follow the instructions below. Turn water off to the toilet at the angle stop on the water supply line. Carefully remove toilet tank top, and place in a safe location to prevent breakage. Flush toilet and hold the handle down until water stops flowing out of the tank and into the bowl.

How do you remove nut from toilet tank?

On newer toilets, this nut is plastic, and you can often unscrew it by hand. On older toilets, however, it’s often metal and may be corroded. If so, use adjustable pliers to loosen it. Move the supply hose away from the valve after you remove the nut. Unscrew the nut holding the ballcock to the tank.

How do you take the lid off of a toilet?

Turn off the water supply to your toilet and remove the tank lid. The valve controls the water supply and is attached to the wall behind your toilet. Turn the handle on the valve to the right to close off the water supply. Then carefully take the lid off the top of your toilet’s tank so you can work inside of it.