How is a crank no-start condition diagnosed?

All good diagnostics start at the beginning, and the beginning of a no-start diagnosis is always the cranking circuit. The cranking circuit, in its most basic form, consists of the battery, starter and cables that connect these components. Battery condition should be the first test of any no-start diagnosis.

What happens when an engine is not firing properly?

When one or more cylinder is not firing properly, the engine will become unbalanced, and this can cause heavy vibrations inside your cabin on acceleration or at idle.

What makes an engine not start or run?

All engines require three things to start and run: spark, fuel and compression. If any one of these is missing, your engine will not start. The fuel pump is running and delivering normal pressure to the engine

What causes the fuel pump to not start?

The fuel pump is running and delivering normal pressure to the engine But, with all that working your engine still will not start. So, the most likely cause, is that the fuel injectors are probably not opening. The (PCM) uses the trigger signal from the crankshaft position sensor; and/or camshaft position sensor to pulse the injectors.

What causes an engine to misfire on all cylinders?

Low fuel pressure will cause a lean mixture in your engine which will result in misfires on all cylinders. If you have trouble codes for misfires on all cylinders, you will want to check your fuel pressure. 5. Injector Problem Another problem, which was more common five years ago, is injector problems.

Why is my engine not getting enough fuel?

Sometimes, if your engine isn’t getting enough fuel, the culprit could be your fuel pressure regulator, a fuel leak, a clogged fuel filter, or clogged injectors. But most of the time, it’s the fuel pump. The fuel pump can usually be checked fairly easily. First, identify your fuel pump location.

How to troubleshoot a small gas engine that won’t start?

1 Put on the safety glasses. Remove the gas cap and check that there is gas in the fuel tank. 2 Look at the spark plug and check that the wire is securely plugged onto the plug. 3 Remove the air filter by unsnapping its box-like cover or removing the wing nut that holds it onto the carburetor.

Why does my fuel pump run hot when I shut off the engine?

This is due to the fact that when you shut off the engine with a low fuel level; the fuel can drain from the priming chamber designed into the fuel delivery system. So when you restart your car, the pump runs hot and un-primed until it can refill the fuel chamber. Over time this will burn out the pump motor.

What happens if there is no spark in the engine?

If no spark is produced, there is no explosion. Besides the explosions have to occur at the right time with the right mix to power and accelerate the engine. Sparks at the wrong time may even harm the engine.