How do you remove a solar cover without a reel?

The general recommendation for removing a solar pool cover without a reel is to use the fan-fold technique. This technique is considered one of the best ways to compact the pool cover for storing at the end of the pool. The solar cover is folded accordion style until it is stacked at the end of the pool.

How do you roll a solar blanket?

Fold the cover back about 3 feet and, while holding the top end in place with one hand, lift the cover and fold it under itself another 3 feet. Flip the cover over itself another 3 feet. Continue folding the cover in this accordion-style manner until you reach the other end of the pool.

Is bubble wrap the same as a solar cover?

Not Actually Bubble Paper While it may look a lot like bubble paper, the product used to cover a swimming pool and potentially heat the water is actually a solar pool cover. It looks very similar to bubble paper, as it contains air bubbles, although the material is much thicker, sometimes as much as 12mm in thickness.

Do you need a solar cover reel?

Do You Need a Reel For Your Solar Cover? Honestly, no. But if you have a solar cover, you know how much of a pain it is to take the cover on and off your pool. Especially if you have a large inground pool.

How should a solar cover fit?

One of the most common fits is to have the solar cover sit right at the edge of the pool wall, which will fit your solar cover on your pool’s surface perfectly. Another option is to leave 2″-3″ around from the edge of the pool wall to remain folded upward on the pool edge.

How to make a solar cover reel for a pool?

A DiY tutorial on how to make a solar cover reel for your above ground pool. A DiY tutorial on how to make a solar cover reel for your above ground pool. We just bought a solar blanket for our 28′ pool this year.

How big of Reel do I need for solar blanket?

Solar blankets can be difficult to pull off and put on again, though, so if you have this problem, you might want to make a reel to store it. Use the tape measure to measure the width of your pool and add 1 foot. This will be the width of your tube, which will allow 6 inches on either side for the reels to straddle the sides.

Can you make a solar blanket for a pool?

It was really easy and inexpensive to make, and he made it with pipe. It allows you to roll up your pool’s solar blanket, and then move the blanket to the side (away from the pool). You can easily replicate this DIY project for the solar blanket on your own swimming pool.

How do you attach a blanket to a reel?

Attach the blanket by drilling the required number of holes in the tubing, which should be about one strap for every foot inside the reels, and screwing the grommet end of the strap into the tubing. Then use the blanket end of the strap, which should come equipped to punch through the blanket, and secure it in place.

How do you roll up a solar cover?

I used the fasteners that came with the original solar roller but you could also use automotive panel fasteners with a hole drilled through the clamp and the pipe. To roll up the cover, I reach under the cover for the pipe and just twist the pipe and the cover rolls up on itself.

How to make an above ground pool cover?

DIY Solar Blanket / Cover for Above Ground Pool Reel – YouTube DIY – Make your own above ground solar blanket reel – Hack for “The Solar Roller Cover Stick”… The Solar Roller Cover Stick retails on their website for $1…