What does the F37 code on a Ferroli boiler mean?

Ferroli boiler fault codes f37. The F37 error code indicates low water pressure. It should not be there if your boiler is operating at around 2.4 bar. If it is there, there are two possible causes. Incorrect information is coming in to the main control board due to a failing pressure sensor; The pressure vessel is faulty.

Are there any problems with the Ferroli boiler?

Top 5 Ferroli Boiler Problems Ferroli Boiler Problems Ferroli Error / Fault Code Low boiler pressure 108 Failing to ignite 5P1 or 5P2 No pilot light 501 Faulty fan A41

Where is the pressure gauge on a Ferroli boiler?

The pressure gauge should be connected to the pressure test point downstream of the gas valve. Move the screw that is adjusting the temperature to maximum value and then adjust the pressure to the proper value. After you completed this stage you will need to twice or three times shut down and start up the burner.

Why does my Ferroli boiler make a puffing sound?

If your Ferroli boiler is only igniting briefly, or making a ‘puffing’ sound, this is usually down to flue problems, such as corrosion in the flue duct, or joints coming lose. The Fix: Get an engineer to replace your flue or clamps holding the flue in place.

What to do if your Ferroli boiler is not working?

Incorrect information is coming in to the main control board due to a failing pressure sensor; The pressure vessel is faulty. Check the system by adjusting pressure to 1.5 bar and monitor it as the system is heating up.

How does the thermostat work on a Ferroli boiler?

The thermostat will automatically control boiler operation with the regards to the heating output, it will also interrupt temporairly the electrical supply to meet the thermostat heat requirements. All Ferroli models are equipped with the LCD display that helps in fault finding.

What does fault 5 on a Ferroli boiler mean?

Fault 5: Boiler igniting briefly or ‘puffing’. If your Ferroli boiler is only igniting briefly, or making a ‘puffing’ sound, this is usually down to flue problems, such as corrosion in the flue duct, or joints coming lose. The Fix: Get an engineer to replace your flue or clamps holding the flue in place.

Can a Ferroli boiler be repaired for free?

Sometimes things do go wrong and to prevent your home from going without heating and hot water for too long we’ve put this handy guide together to help you get your Ferroli boiler going again. Should you need an engineer, you can get free boiler repair quotes from trusted engineers near you with our service.

What does the bthis symbol on a Ferroli mean?

Please see installation and servicing guidelines. •”Ferroli declare that no substances harmful to health are contained in the appliance or used during the appliance manufacture”. BThis symbol indicates “Caution”and is placed next to all safety warnings.

Where is the boiler mounting bracket on a Ferroli boiler?

Your Ferroli boiler should be located on wall bearing the load of the appliance 30-60 kg depending on a model which will provide an adequate fixing for the boiler mounting bracket assembly.

How does the domicondens F-Ferroli water system work?

If the room ther- mostat is not installed, the boiler will keep the system at the set system delivery setpoint temperature. Room temperature adjustment (with optional remote timer control) Using the remote timer control, set the required temperature in the rooms. The boiler will adjust the system water according to the required room temperature.

What do you need to know about Ferroli fault codes?

Listed below are the common Ferroli fault codes as described by the boiler manufacturer along with a possible cause. Fan problem – tachometer signal interrupted fan connection or damaged debris in fan. You need to check and clean fan debris

What should the pressure be on a Ferroli boiler?

The pressure vessel is faulty. Check the system by adjusting pressure to 1.5 bar and monitor it as the system is heating up. It should not exceed 2 bar when it heats up to the point. If it exceeds 2 bar too soon and continues to grow, the pressure vessel needs to be replaced.

How to turn on hot water on Optimax he 31 C?

OPTIMAX HE 31 C Domestic Hot Water mode The Domestic Hot Water heat demand (generated by the DHW flow sensor or due to a Comfort request) is indicated by the flashing of the Hot Water symbol under the tap (part. 8 and 9 – fig. 1). The display indicates the actual Domestic Hot Water temperature (part. 11 – fig. 1). 1.3 Turning ON and OFF

What are the instructions for Eire Optimax he 31 C?

G.C. n° 47-267-42 INSTRUCTIONS FOR USE INSTALLATION AND MAINTENANCE FOR THE UNITED KINGDOM AND EIRE OPTIMAX HE 31 C 2 • Read the warnings given in this manual thoroughly. They provide important information for safe instal- lation, use and maintenance • By law the instruction manual must be left with the end user.

What kind of heater is made by Ferroli?

Let’s talk about the types of heaters, their operation and possible damage. Ferroli is an Italian company that manufactures various household appliances, starting with heaters and ending with a variety of air conditioners.

When did Ferroli boilers become an international company?

For the first time she declared herself in the middle of the last century.Over the decades of its work, Ferroli has become an international company that has branches throughout the world, including Russia. In our country, their products are known for their high quality and reasonable price.

Why is my boiler not working at 2.4 bar?

It should not be there if your boiler is operating at around 2.4 bar. If it is there, there are two possible causes. Incorrect information is coming in to the main control board due to a failing pressure sensor; The pressure vessel is faulty. Check the system by adjusting pressure to 1.5 bar and monitor it as the system is heating up.

How to know if your boiler has high limit protection?

High limit protection – flow temperature sensor not active, incorrectly located or no system circulation. Check the position of the flow sensor or check pump and radiator valves High fume temperature – the exchanger probe detects an excessive temperature for over 2 minutes – check the exchanger.

What to know about Optimax he plus 31 C?

1.1 Introduction Dear Customer, Thank you for choosing the OPTIMAX HE PLUS 31 C, a FERROLI wall-mounted boiler of the latest generation, featuring advanced design and cutting-edge technology.

How does air purge work on Optimax he plus 31 boiler?

Ensure the power is on to the appliance. For the firsts 120 seconds, the display shows FH that identifies the Air purge function. During the first 5 seconds, the display shows the software version of the pcb. Open the gas cock on the boiler and purge the air from the pipework upstream of the gas valve.

What to do if your Ferroli boiler timer breaks?

The Fix: The cheap mechanical timers that were often installed in Ferroli boilers tend to be very flimsy and often break if someone tries to turn the timer back. It should be fairly simple to replace the programmer.

1.1 Introduction Dear Customer, Thank you for choosing the OPTIMAX HE PLUS 31 C, a FERROLI wall-mounted boiler of the latest generation, featuring advanced design and cutting-edge technology.

What kind of boiler is Optimax he Plus C?

Dear Customer, thank you for choosing the OPTIMAX HE PLUS C, aFERROLIwall-mounted boiler of the latest generation, featuring advanced design and cutting-edge technology. OPTIMAX HE PLUS Cis a high-efficiency condensing pre-mixappliance for heating and hot water production with extremely low emissions, running on natural gas or LPG.

What are the most common faults of a Ferroli boiler?

That’s why I’ve put together this blog post detailing five of the most common faults and fixes for Ferroli boilers, so you can get an idea of what’s causing the problem and what the solution entails. NOTE: Remember, DO NOT try to fix the problem yourself; always call a Gas Safe registered engineer.

What should I do if my Ferroli boiler leaks?

NOTE: Remember, DO NOT try to fix the problem yourself; always call a Gas Safe registered engineer. Ferroli manufacture cheap budget boilers which are known to be quite unreliable, with cheap fittings that are prone to leaks after a bit of wear and tear.

Is it worth it to replace a Ferroli boiler?

Especially if your Ferroli boiler is old, it may be worth considering a replacement boiler. Spare Ferroli parts tend to be very expensive, and the boilers themselves are unreliable and prone to multiple faults, so even if you fix whatever’s wrong now, you may find the boiler breaking down again in a couple of month’s time.