Why does my Biasi combi boiler only supply hot water?
Why does my Biasi combi boiler only supply hot water?
The best way to get to the bottom of it will be to have a GSR engineer come out and have a look at it for you. Sounds like a diverter valve. When they fail it normally only allows hot water only. If there is no diverter valve in that model then it will be a split diaphragm that does the same job.
What causes error code ER 04 on Biasi boiler?
If there is a problem with either the water circulation or water supply to your Biasi boiler, it is likely to show error code ER 04 on the display panel. This error is fairly common and is usually caused by a lack of water pressure.
What kind of boiler specialist do I need for Biasi?
Use only qualified Pro Fit Loyality Club boiler specialist to work on Biasi gas boilers. 1.Before lighting the boiler you are advised to have a professionally qualifi ed person check that the installation of the gas supply: – is fitted with all the safety and control devices required by the current regulations.
How to activate 3 star preheating on Biasi boiler?
To activate the 3 star preheating function press keys 12 and 13 together until the letters “cF” appear on the boiler’s LCD display which alternates with the word “on” To disable the 3 star preheating function press keys 12 and 13 together (Fig. 2.18) until the letters “cF” appear on the boiler’s LCD display which alternates with the word “oF”.
The best way to get to the bottom of it will be to have a GSR engineer come out and have a look at it for you. Sounds like a diverter valve. When they fail it normally only allows hot water only. If there is no diverter valve in that model then it will be a split diaphragm that does the same job.
Can a combi boiler run hot and cold?
That is quite a lot to expect from a combi boiler without backup hot water in a cylinder in the attic. If a combi boiler can’t manage all the hot water demands simultaneously, then it gives hot running water priority. Therefore, it may turn the radiators off temporarily, while someone draws water in the kitchen, runs a bath, or takes a shower.
Why does my combi boiler turn off when I take a shower?
If a combi boiler can’t manage all the hot water demands simultaneously, then it gives hot running water priority. Therefore, it may turn the radiators off temporarily, while someone draws water in the kitchen, runs a bath, or takes a shower.
If there is a problem with either the water circulation or water supply to your Biasi boiler, it is likely to show error code ER 04 on the display panel. This error is fairly common and is usually caused by a lack of water pressure.