What causes a vokera boiler to not ignite?

There are many possible reasons why a Vokera boiler will fail to ignite: faulty ignition leads or electrode (needed to make the spark to create the flame), blocked flue or condensate pipe, issue with the gas valve or a printed circuit board (PCB) fault. These are some of the more common faults that will prevent a Vokera boiler to ignite …

What does A01 mean on a vokera boiler?

A common Vokera boiler fault code is A01 which means that the boiler has failed to ignite. There are many reasons why a boiler might fail to ignite, from no gas supply to a faulty ignition lead or PDB board. You’ll need a Gas Safe engineer to diagnose and repair the A01 fault as you should never carry out any work on your gas boiler yourself.

Can a Gas Safe registered engineer repair a vokera boiler?

These are some of the more common faults that will prevent a Vokera boiler to ignite but there are many more possibilities. A Gas Safe registered engineer will be able to safely diagnose and repair the fault that’s getting in the way of your Vokera boiler igniting.

How do you reset a vokera hot water boiler?

To reset your Vokera boiler, move the mode selector switch to the ‘OFF/RESET’ position and then move it back to either ‘hot water only’ or ‘heating and hot water’. Should this reboot get your boiler working again then you’ll know because there will be a constant green light.

What do you need to know about a vokera boiler?

Vokera Combi Boilers (Compact, Linea, Unica, Vision) are designed to provide hot water to your taps and heated water to your radiators. Normally central heating is controlled by both thermosat and by a time clock.

What to do if your vokera boiler is flashing red?

How to Reset a Vokèra Boiler. A simple reset could be enough to stop your Vokera boiler from flashing red and get the unit working to heat your home and hot water again. To reset your Vokera boiler, move the mode selector switch to the ‘OFF/RESET’ position and then move it back to either ‘hot water only’ or ‘heating and hot water’.

How does the temperature selector work on a vokera radiator?

The temperature selectorscan be used to vary the temperature of the water that circulates around your radiators and the water that flows from your hot water taps. The temperature range is adjustable between 40oC and 80oC for the central heating, and between 37oC and 60C for the hot water.

What does vokera compact fault code A03 mean?

Vokera Compact fault code A03 The Fault: The above fault code means there’s likely a fault with your boiler’s fan; it may have become worn down over time. The Fix: Test it out with a volt meter; if power levels are correct, it’s definitely time to replace your fan. If there’s no power, check the wiring from the PCB. 5.