What is the default WIFI password for Dlink router?

What is the default WIFI password for Dlink router?

Step 1: Open your web browser and enter http://dlinkrouter or http://dlinkrouter.local or http://192.168.0.1 into the address bar. The default username is Admin and the password is blank (nothing).

How do I change my D-Link DIR-300 WIFI password?

How do I change my D-Link Router’s password?

1. Step 1: Open your Internet browser and enter.
2. Step 2: Enter the password for your Admin account in the field provided.
3. Step 3: Locate the Wireless Settings from the drop down menus.
4. Step 4: In the Password field, specify the new wireless password for the desired wireless band.

How do I configure my Dlink router DIR-300?

How to setup WPA-PSK / WPA2-PSK for DIR-300

1. Step 1 Connect Your PC (Laptop) to the Router (Port 1,2,3,4 either one of them) using Network cable.
2. Step 2 Launch your IE (Internet explorer) and key in 192.168.
3. Step 3 Enter your Username: admin and no password (if it is default) click on OK.

How do I find the admin password on my Dlink router?

Step 1: Open your web browser and type in http://dlinkrouter.local. or type in the IP address of the router (default – http://192.168.0.1). Step 2: Enter or select the username (admin) and enter your password (blank by default), and then click OK or Log In. The password is case-sensitive.

How do I setup a password for my router?

To change your router’s password:

1. Enter your router’s IP address into your favorite web browser.
2. Log in with the default username and password (both admin, usually).
3. Go to settings.
4. Select Change Router Password or a similar option.
5. Enter the new password.
6. Save the new settings.

How do I reset my Dlink DIR 300?

Locate the reset pin hole on the back of the DIR-300 as per below: 2. Insert a paperclip into the reset pin hole and hold in for 10 seconds. While holding in the reset button, refer to the Status LED, when it starts to blink rapidly, release the paperclip holding in the reset button.

How do I change my WIFI security settings Dlink?

How to Make My D-Link Wireless Router Secure

1. Open your Web browser.
2. Type “admin” (without quotes) into the “User Name” to log in with the default login.
3. Click the “Wireless Settings” tab.
4. Click the drop-down arrow of the field next to “Security Mode.”
5. Select the security mode you want to apply to the router.