What is an FME female connector?

The FME female is designed to be low diameter to allow cables it has been installed on to be snaked through the often tight access holes or spaces of a vehicle to the desired equipment location(s) where an FME male adapter to the required equipment connector series is fitted to the female cable connector. …

What is FME adapter?

The FME connector (For Mobile Equipment) is a 50 Ohms miniature RF connector adapted for outstanding performance in condition and transmission of frequencies between 0 and 2GHz frequency range. FME connectors are mostly used in cellular communication devices and data applications.

What is a PL259 connector?

PL-259 Connectors, Adapters & Reducers for Ham Radio Applications. The PL-259 is also known as a UHF connector with the common male/female variants. The male UHF PL259 is the most common connector used to interconnect equipment and antennas in ham shacks.

What is an F type connector?

A. F. A two-wire (signal and ground) coaxial cable connector used to connect antennas and set-top boxes to TVs, VCRs and DVDs. F connector cables typically carry analog NTSC TV signals, and the plug’s socket is easily identified by its threads.

What is RG58 coax used for?

The RG58 cable is prominently used for two-way radio communication systems, such as amateur radio, police radio, marine VHF (Very High Frequency), WLAN (Wireless Local Area Network) antennas and so on. It is also used along with BNC connectors to test laboratory equipment connections.

Are so239 and PL259 the same?

Typically, the SO-239 (UHF Female/UHF Jack) is installed ON THE RADIO, and the PL-259 (UHF Male/UHF Plug) is installed ON THE CABLE. The two “mate” and are collectively known as a UHF Connection. Have a question about a different connector type? Or shop for our various Coax Adapters and Cable Connectors!

What is RP SMA male?

Reverse polarity SMA (RP-SMA) is a variation of the SMA connector specification which reverses the gender of the interface, as shown in Figures 1-4 below. Similarly, the RP-SMA(M) has threads on the inside like a conventional male, but has a center receptacle instead of the male pin in the middle.

What is af female connector?

The female connector has a socket for the center conductor and external threads. The male connector has a center pin, and a captive nut with internal threads. The design allows for low-cost construction, where cables are terminated almost exclusively with male connectors.