How much does a centrifugal chiller cost?

For centrifugal chillers over 400 tons, prices range from $200 to $500 per ton for the chiller itself; for centrifugal chillers less than 400 tons, prices range from $250 to $600 per ton for the chiller itself. A VFD can add from $30 to $80 per ton (see Table 2).

How much does a chiller unit cost?

Air-cooled chiller costs vary by manufacturer, location, and technology options. A survey of the major manufacturers shows an average cost for the chiller itself of approximately $350 to $1,000 per ton, depending on capacity (see Table 2).

How does a Trane centrifugal chiller work?

A centrifugal chiller uses the vapor compression cycle to chill water. It throws off the heat collected from the chilled water plus the heat from the compressor to a water loop. The water loop is cooled by a cooling tower. Centrifugal chillers are popular because they have relatively few moving parts.

How much does a 500 ton air cooled chiller cost?

The following analysis compares two 500-ton chiller systems, one with an air-cooled system, and the other with a water-cooled system….Also Provides Reduction in Peak Demand.

500 Ton System	Water Cooled System	Air Cooled System
(One-time cost)	$ 242,033	$ 188,200

What is the difference between an absorption chiller and centrifugal chiller?

A centrifugal chiller is one of the chiller types that uses a mechanical compressor. Absorption Chillers: These chillers send steam or hot water through tubes, where they boil off the refrigerant and turn into vapor, which moves into the condenser.

Where are Trane chillers manufactured?

China
TAICANG, China – Trane, the air conditioning business of United States-based American Standard Companies, established its factory presence in China in 1995 with three joint ventures with existing Chinese companies. Today, the business has consolidated its manufacturing in one plant located in Taicang, Jiangsu province.

What is the difference between screw chiller and centrifugal chiller?

Centrifugal compressors have better full-load efficiency, and screw compressors can achieve comparable part-load efficiencies. Screw compressors are also better for part-load applications because they’re stable down to about 10% capacity, whereas centrifugal compressors can begin to surge at about 20% to 40% capacity.

What is chiller efficiency kW ton?

The term kW/ton is commonly used for larger commercial and industrial air-conditioning, heat pump and refrigeration systems. The term is defined as the ratio of energy consumption in kW to the rate of heat removal in tons at the rated condition. The lower the kW/ton the more efficient the system.

Which type of chiller is best?

Water-Cooled Chillers

Water-cooled chillers are generally more efficient than air-cooled chillers.
They have a quieter operation than air-cooled systems.
They are suitable for both small-scale and commercial-scale cooling.
Portable solutions are available for facilities with space constraints.

How many types of chiller systems are there?

There are 3 types of chillers that cool things using air, water, and evaporation. Each type may have subcategories based on how each of them accomplish this goal.