How much sand do I need for my pool calculator?

Volume = (width x length x depth) x 0.037 For a rectangular pool that’s 18 feet long by 9 feet wide, you’d need at least 1 cubic yard of sand for your base.

How many gallons is a 15 x 42 pool?

Water capacity: (80%) 3,284 gallons. Includes: Krystal Clear Cartridge Filter pump, 1,000 gph (110-120V). Ladder. Ground Cloth.

How long does it take to fill up a 15 x 42 pool?

Answer : 2-5 hours, depending on which pool, hose size and water pressure.

How deep is a 42 inch pool?

42” panel = shallow end a depth of 34”-36”

How many bags of sand do I need for a 16 foot pool?

How much sand do I need for my Intex pool? Depending on the surface underneath, you’ll want at least 3″ of sand, if not more, and you’ll want it to cover at least a 16’x16′ area so it’s bigger than the pool. That would take about 2 1/2 yards of sand, minimum, so you’d get 3 yards.

Does sand Wash from under pool?

Sand foundations can wash away if they are not built up properly. Choose an area that doesn’t have too much water flow from rainfalls. Place a cinder block inside the foundation area where each pool post will be resting and layer the inside of the boarded foundation with pea gravel, and then sand.

How much sand do you need to level out a swimming pool?

We had about 10 cubic yards of sand delivered for about $90, but the sand pit is only 2 miles away so we got a break on the delivery charge. We got this huge amount because we needed the sand for other projects in addition to leveling our pool site.. Note that this calculator adds 3 feet to your diameter and calculates the sand to level your area.

What kind of sand should I use for an aboveground pool?

Use masonry sand as the base material for an aboveground swimming pool. Ensure that any sand you use is free of debris such as twigs, rocks or anything else that might puncture, rip or tear a pool’s vinyl liner.

How to calculate how much sand is needed for the floor of?

Calculate how much sand is needed for your above-ground pool installation. If you plan to install an above-ground swimming pool, you will need to get the necessary amount of sand for the floor. The sand foundation is placed under the pool liner to help protect the liner from rocks and other sharp objects that can put holes it.

How to spread sand to build a pool?

Here are a few tips to keep in mind: 1 You can dampen the sand to make it a little easier to lay. 2 Keep the sand inside the pool track, rather than underneath it. 3 Use the back of a rake or a push broom to spread and smooth the sand. 4 Compact the sand with a soil tamper or another tool for compacting soil.

How do you find out how much sand you need for a pool?

If you know the dimensions of your pool area, then you can easily figure out how much sand you’ll need for the base using a sand calculator. On GIGA Calculator’s sand calculator, note whether your pool area is rectangular or circular and write in the dimensions. Then, it’ll compute the volume and weight of the sand you need.

How big of a sand base do you need for an Intex pool?

Just install these 4-6 inches outside the circle you marked. Finally, do not use excessive amounts of sand. If there is less to erode, then any problems you have will be smaller. Just 1/2″ – 1″ of sand is more than enough to smooth out the small divots and give you a nice soft surface beneath the pool.

Can you use dirt as a base for a swimming pool?

A: We do not recommend using dirt as the base for your pool. Dirt may contain rocks or pebbles that can damage your liner. We only recommend very fine mason sand for your swimming pool sand. Q. Do you need to compact the sand?

What kind of sand do you need to build an above ground pool?

You also need sand to build an above ground pool is because the sand used to actually clean it. This kind of sand is called filter sand or silica sand, and it catches debris so that it doesn’t end up in the pool water.