What size is the nut on a Moen faucet?

What size is the nut on a Moen faucet?

15/16″
thank you all. Answer: This tool will fit a 5/8″ and 15/16″nut.

How do you remove a garden tub faucet?

Starts here1:27How to Replace a Garden Tub Faucet – YouTubeYouTubeStart of suggested clipEnd of suggested clip52 second suggested clipPiece this particular one you have a handle. And then you have a hub. Which should unscrew andMorePiece this particular one you have a handle. And then you have a hub. Which should unscrew and there’s your trim that you can take down to match. Next thing is in your tub spout or garden spout.

How do you remove a hex nut from a faucet?

Share this story

1. Tighten the nut. Moving the nut in any direction is progress.
2. Tap with a hammer. Jarring the nut can break its bond to the bolt.
3. Apply heat. Metal expands slightly when hot, which may be enough to crack the nut free.
4. Soak the nut.

What size Allen wrench takes off a Moen shower handle?

7/64 wrench
The handle set screw can be removed with a 7/64 wrench. APhillips screwdriver is used to remove the handle.

Are there different size basin wrenches?

Box spanner basin wrenches come in a wide variety of sizes depending on your needs. However, the most common sizes match the typical sizes of nuts used in plumbing fixtures and pipe fittings: 8mm, 10mm, 15mm, 22mm, 28mm, 32mm, and 38mm etc.

What can you use instead of a basin wrench?

If a basin wrench is not available at home, you might have socket wrench available in your toolbox. You will need a ratchet spanner, and you might need screwdrivers, channel lock pliers, a clean cloth, and water pump pliers as well. You may also use a sink drain wrench if you have one.

How do you remove a Moen Roman tub spout?

Step One-Will the Spout Fit?

1. Remove the round plug button from behind the spout.
2. Use a 5/32″ Hex wrench to remove the Hex screw from behind the spout.
3. Pull up on the spout to remove the old spout. This may be difficult to remove due to sealant or putty around it.
4. Measure the spout shank.

How do you remove a Roman tub faucet?

Starts here5:00Delta Roman Tub Valve Replacement – YouTubeYouTube

How do you remove a bolt lock nut?

Starts here1:01Tony The Toolman – How to Remove a Lock Nut! – YouTubeYouTube

What does a hex wrench look like?

The Allen wrench itself is a small L-shaped wrench with six sides. If you look at a cross-section of the Allen wrench, it looks like a hexagon. When you need to use the Allen wrench, stick the short end of the L shape into the bolt head and press down on the longer side of the L to turn the bolt.