What can I use instead of deck railing?

Consider stainless-steel cables, metal tubes, or composite railings if you’re looking for low-maintenance alternative to wood balusters and railings for your deck.

Should a front porch have a railing?

In most cases, you are required to have a railing when the floor of your porch is 30 inches or more above grade. However, 30 inches can be a long to fall; therefore some codes may require railings if your porch is 15 or 24 inches above grade.

Can you build a deck without railings?

If your deck is below 30 inches, a railing is not required. With that said, if you choose to build a deck, even if it is only 24 inches off the ground, that is still high enough that even an adult could injure themselves.

How high can a deck be without railings?

30-inch
He’d made a point of building his deck so as to stay under the 30-inch requirement–which is the maximum deck height you can have without a railing.

What is code for deck railing?

What Is Code For Deck Railing Height? The IRC requires guardrails to be at least 36″ in height measured from the deck surface to the top of the rail. Commercial decks attached to multifamily buildings regulated under the International Building Code (IBC) require 42″ high guardrails.

How much does it cost to put railing on a deck?

The average cost to install a 10-foot deck railing is $925, with projects varying from $420 to $6,480. Materials alone can range from $150 to $6,000 for a 10-foot section. Labor varies but averages at about $70 per hour or $30 per linear foot. Prices vary depending on what materials you choose.

How do you fill gaps on a deck railing?

Hold the caulk gun at an angle against one end of the railing gap. Squeeze the caulk gun trigger and pull the gun along the gap rapidly to lay an even bead of caulk. If the gap is wider than the tip of the caulk tube, move the gun slower to lay a thicker bead to fill the gap.

What is code height for deck railing?

36″
What Is Code For Deck Railing Height? The IRC requires guardrails to be at least 36″ in height measured from the deck surface to the top of the rail. Commercial decks attached to multifamily buildings regulated under the International Building Code (IBC) require 42″ high guardrails.

How high can a deck be before you need a railing?

All decks greater than 30″ above grade must have a guardrail. If you choose to install a guardrail on a deck lower than 30″, you must still meet code requirements.