How much should I charge for scrub and wax?
How much should I charge for scrub and wax?
The price you charge your client can vary due to several factors, but the national average is 30 to 60 cents per square foot. However, some jobs can go up to 90 cents or more depending on how difficult the job is.
How much does floor scrubbing cost?
Floor cleaning prices:
| National average cost | $346 |
|---|---|
| Average cost range | $250-$400 |
| Low-end cost | $100 |
| High-end cost | $1,500 |
What is a scrub and recoat?
When to Scrub and Recoat Scrubbing and recoating is performed when there is little to no finish remaining on the floor, or there is no buildup requiring a full strip and wax. The scrubbing process removes any deeply embedded soils from the floor and prepares it for reapplication of floor finish.
How do you calculate floor stripping?
Example – Strip and Wax 10,000sf VCT
- Cost of stripper (10,000 sq ft / 1,000 sq ft per gallon = 10 gallons x $15 = ($150) = 1.5 cents per square foot.
- Cost of finish (5 coats x 10,000 sq ft / 2000 sq ft per gallon = 25 gallons x $14ea = $350) = $.035 cents per square foot ($350)
- Cost of pads, mops, etc. (
How much does it cost to get floors buffed?
How much does it cost to clean hardwood floors in my home?
| Method | Cost |
|---|---|
| Hardwood floor cleaning | $.50 – $.75 per square foot |
| Buffing | $1.25 – $1.75 per square foot |
| Coating | $.65 – $1.25 per square foot |
What is the difference between top scrubbing and stripping and refinishing?
Put simply, scrubbing is the process of taking any damaged layers of finish off of your floor and then refinishing it as appropriate. Stripping, on the other hand, is the process of removing all finish that may be on the floor and refinishing it as through it were a new floor.
How much does floor stripping cost?
HomeWyse states that average cost to strip and wax a floor is about $174. The lowest cost you could expect to pay is about $148 while the highest cost is about $200. This cost estimate is based on a 314 sq ft room. This makes the average cost of stripping and waxing a floor at $1.80 per sq ft.
How much is a floor stripper?
A general rule of thumb for stripper is 1 gallon of diluted stripper per 100 square feet of floor needing stripping. If a stripper has a dilution ration of 1:5, that is stating to add 1 gallon of the concentrate to 5 gallons of water making 6 total gallons of liquid.