What is the maximum number of link interface EtherChannel bundles on a Cisco 2960 series switch that can be created?

You can assign up to 16 physical interfaces to an EtherChannel but only 8 interfaces will be active at a time.

How do I enable LACP on a Cisco switch?

There are few LACP modes: “active”, “passive” and “on”. Switch(config)#interface port-channel 5 Then you need to assign the physical ports and specify LACP mode.

Is LACP the same as 802.3 ad?

LACP is a data link layer protocol defined in IEEE 802.3ad standard. It provides a method to control the bundling of several physical ports together to form a single logical channel.

What is LACP Cisco?

(LACP) LACP is defined in IEEE 802.3ad standard and enables Cisco switches to manage Ethernet channels between switches that conform to the standard. LACP facilitatesthe automaticcreation of EtherChannelsby exchanging LACP packets between Ethernet ports.

How do I enable LACP?

Access LACP from the Configuration >Network >Port tabs. Use the drop-down list to enter the LACP values. LACP Group— the link aggregation group (LAG) number; the range is 0 to 7. Mode— active negotiation state or not in an active negotiation state indicated by the passive option.

Can LACP be active active?

Now coming to LACP mode, it can be active or passive, but for LAG to be functional at least one side must be configured with active (by default when configured LACP its mode is passive).

What is Cisco LACP?

What are the features of Cisco Catalyst 2960-x and 29 60-xr series switches?

Cisco Catalyst 2960-X and 2960-XR Series Switches feature: ● 24 or 48 Gigabit Ethernet ports with line-rate forwarding performance ● 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP) uplinks or 2 fixed 10 Gigabit Ethernet SFP+ uplinks ● PoE+ support with a power budget of up to 740W and Perpetual PoE

What is the Cisco DNA Center on the catalyst 2960-x?

● Cisco DNA Center on the Cisco Catalyst 2960-X and 2960-XR Series Switches provides a simple web user interface to enterprise network customers for day-zero plug and play, switch discovery and management, topology visualization, and software image management. For details on Cisco DNA Center features, please refer to dnac.cisco.com.

What is the active mode of the catalyst 2960 switch?

One of the switches is in active mode. The others are in standby mode. For redundancy, remote switches, such as Catalyst 2960 or 2960-S switches, are connected to the virtual switch by remote satellite links (RSLs).

What is the difference between LACP and PAgP?

PAgP sends and receives PAgP PDUs only from ports that are up and have PAgP enabled for the auto or desirable mode. The LACP is defined in IEEE 802.3ad and enables Cisco switches to manage Ethernet channels between switches that conform to the IEEE 802.3ad protocol.