How do you replace a Gerber bathtub drain?

How do you replace a Gerber bathtub drain?

How to Repair a Gerber Tub Drain

1. Remove the lift and turn stopper, if present.
2. Remove the tub drain flange, the metal or PVC fixture that drains the water in the end of the tub.
3. Clean around the drain opening.
4. Check the Gerber tub drain flange for damage.
5. Turn the drain right side up and screw into the drain opening.

Why is my bathtub drain not holding water?

If your bathtub doesn’t hold water, the culprit might be a faulty bathtub drain stopper. It also drains the tub when not in use. In most cases, an issue with the bathtub drain stopper is usually because it has disconnected from the spring or plug that connects it to the linkage.

Where does the rubber washer go on a bathtub drain?

A thick rubber gasket completes the seal on the underside of the tub. It goes over the drain insert before threading the insert into the elbow portion of the drain line, also called the drain waste shoe or ell.

Should bathtub lever be up or down?

When the lever is up, the stopper is held in place, keeping your tub filled with water. When the lever is moved down, the stopper lifts and the tub drains.

What is a trip lever for a bathtub?

A trip lever drain is a type of mechanism that is found in many bathtub designs. Essentially, the trip lever works as part of an apparatus that allows the stopper to be opened or closed, making it possible to retain water in the tub or release the water into the drain.

How do you remove a tub stopper without screws?

If your stopper does not have a visible screw set on the knob, but does not seem to unscrew, lift the stopper up and turn, looking for a small screw. Use a standard flathead screwdriver or an Allen wrench (hex key) to loosen the set screw. You shouldn’t have to remove the screw entirely to remove the stopper.

Do you put plumbers putty under tub drain?

A bathtub drain flange is the finished drain part that’s visible in the tub. Between the underside of the flange and the tub surface, there’s a good amount of plumbers putty that seals the inside of the drain. A rubber gasket underneath the tub seals the drain elbow to the tub.

Should I use plumbers putty on bathtub drain?

Plumber’s putty is product that’s used to seal drain bodies to tub surfaces. It should be used only in nonpressurized plumbing situations, such as draining, and never for water-supply lines.