Can I leave my Bose SoundLink mini plugged in?

The manual and the Bose website both recommend not leaving the device in the charger for long periods of time at full charge.

Why is my Bose speaker not loud enough?

If your Bose speaker won’t play music or make a sound in general, it can either come down to user error or an issue with the hardware itself. Ensure that the device is not muted and you have the volume turned up. If so, reset the speaker; this will restore the device to its factory settings.

Can you change the battery in a Bose Bluetooth speaker?

The battery in your product can be removed so you can insert a new battery if your battery weakens or dies.

How does the Bose SoundLink Mini speaker charge?

Connect to AC power via the charging cradle. The charging cradle provides a home base for your Bose® SoundLink® Mini speaker. You can connect to AC power through the charging cradle and, with the speaker placed on the charging cradle, charge the battery.

How to remove ribbon cable from Bose SoundLink Mini button?

Carefully pull on the battery cover until the rubber tab slides out of the aluminum casing. Remove the sponge (save for later replacement) and gently flip the black tab 90 degrees to release the connectors grip on the ribbon cable. Remove the ribbon cable from the connector.

What should I not do with my Bose SoundLink?

• Do not place any naked flame sources, such as lighted candles, on or near the apparatus. • The battery pack shall not be exposed to excessive heat such as sunshine, fire or the like. • Do not dismantle, open or shred battery pack. • Do not short-circuit the battery or battery pack.

How do you repair a Bose SoundLink grille?

Place Metal Spudger in the location shown. Slowly pry up the grille until the two tabs shown pop out. Be very gentle, the grille will bend. The grille is attached to the speaker with double sided sticky tape. To remove the grill gently pull upward while keeping tension to the right. Be very gentle, the grille will bend.

How do you replace a Bose SoundLink Mini?

Peel back the rubber battery cover and remove the four circled 6.0 mm screws using a T8 Torx Screwdriver. While holding the cover back, pull straight up on the battery to remove it. Insert the Metal Spudger between the rubber edge on the grille and the aluminum casing.

How long does the Bose SoundLink Mini battery last?

Battery performance varies with the content played and loudness at which it is played. In typical usage, the Bose® SoundLink® Mini speaker battery lasts up to 12 hours. Checking the battery. When the speaker is turned on, the battery indicator turns on for ten seconds, then turns off to conserve battery power.

What are the requirements for a Bose SoundLink?

Operation is subject to the following two conditions: Metal (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Output power: 4 mW @ 2400 MHz This product conforms to all applicable EU directive requirements.

Do you need to charge battery before using Bose SoundLink?

Bose cannot warrant the safety and compatibility or assure the operability of batteries from other manufacturers for use in operating this product.Keep battery pack clean and dry. • The battery needs to be charged before use.