Can I use 10W40 in my ATV?

10W40 you will be fine as long as the oil you chose to use is rated for atv clutch, I have stepped out off the box from using Yamalube which is a very good oil and i’m using Motul 4t 5100 10w40 which is a very good oil, my dealer sells it, my Grizz couldn’t be happier.

What is 10W40 motor oil good for?

The 10W-40 engine oil has a thicker viscosity than, say, 10W-30 oil when the car engine is hot. This helps it lubricate older moving parts in high mileage engines while being less likely to leak.

Can you use car engine oil in an ATV?

Your car oil can work with your four-wheeler. To keep the engine in your vehicle functioning optimally, you should only use either manufacturer-recommended oils or other options that have been proven to work for vehicles like your brand.

Can I use car oil in an ATV?

You may ask, “Why can’t I just use car oil in my 4-stroke ATV/UTV? It’s the same thing, right?” The answer, in short, is no. ATV/UTVs run hotter and at higher RPMs. They have a lower oil volume and many use a common sump for the engine, clutch and transmission.

Is 10W-40 Synthetic?

Semi-synthetic oils such as 10W40 have long been the standard. Their base is refined crude oil, which is then blended with additives.

Is 10W50 better than 10W40?

At 100ºC, the 10W50 has a viscosity of 18.1cS, the 10W40 is at 13.1cS. What this means is, at low temperature, they perform similarly, but at operating temperature, the 10W50 has better protection (higher film strength) than the 10W40.

Is there a big difference between 10W30 and 10W40?

10W40 is “thicker” than 10W30 when the car is at running temperature. Some people might also refer to it as “heavier”. Neither of these terms is technically accurate, but they do help to visualize it. In reality, we would say that 10W40 is more viscous than 10W30.

What does 10W40 stand for?

The designation “10W-40” indicates a multigrade oil that is toward the low end of the SAE scale in cold weather, but at the upper end in hot conditions. 10W-40 oil is therefore good for a wide range of weather conditions.

What is 10W40 oil used for on a ATV?

It provides reliable wear protection and aids in cooling shrouded engines. AMSOIL 10W-40 Synthetic ATV/UTV Motor Oil’s superior friction-durability properties help minimize clutch slippage, fade and chatter, giving riders consistent clutch feel during takeoffs or when maneuvering around obstacles on the trail.

What kind of oil do you put in a Lucas ATV?

Lucas Semi-Synthetic SAE 10W-40 ATV Engine Oil is a long lasting oil that stands up to the high temperatures of slow moving hard-working air cooled engines. It exceeds manufacturer specifications and meets JASO specifications.

Why choose AMSOIL ATV/UTV motor oil?

AMSOIL Synthetic ATV/UTV Motor Oil contains no friction modifiers and promotes smooth shifting and positive clutch engagement. It controls heat and helps improve clutch life. AMSOIL Synthetic ATV/UTV Motor Oil underwent on-track testing in the ATVs and UTVs of AMSOIL-sponsored professional riders in the GNCC Series.