Can I use drywall mud to texture a ceiling?

Although it is possible to buy texturing compound, many drywall professionals use regular drywall joint compound, or mud. It comes pre-mixed or as a powder, and either way, you have to mix it with water to make it the right consistency for texturing.

How do you mud a textured ceiling?

The standard rule of thumb is one part drywall mud to 10 parts paint. Pour paint into a bucket, add drywall mud, and blend, aiming for the consistency of pancake or biscuit batter. Depending on the look you’re going for, you might want a somewhat thicker consistency.

Can you use drywall compound for texture?

Texturing Walls with Drywall Joint Compound An easy way to texture walls is by simulating a stucco finish with joint taping compound (also known as drywall mud) which can be purchased at any home improvement store. Apply taping or joint compound to your wall with a trowel or a wide compound knife.

Can you use joint compound on ceilings?

Mix up a small batch of 20-minute setting-type joint compound to a peanut-butter consistency, mist the ceiling with water from a spray bottle—that ensures the compound will set properly—and apply a thin layer of compound to the ceiling with the taping knife.

Can I use premixed joint compound for texture?

Regular drywall joint compound, or mud, is generally used to create the knockdown texture. You can use the premixed variety or mix your own. Either way, you must be able to spray the mixture with the hopper gun, so it should be about the consistency of pancake batter or thick paint.

How much drywall mud Do I need to texture a ceiling?

It generally takes 1-1/2 to two full buckets of mud to texture the walls and ceiling of an average size (12 x 12-ft.) room.

What is better orange peel or knockdown texture?

Orange peel is actually a tiny splatter and has become very common. It can be sprayed on both walls and ceilings, as well as painted however you like. Knockdown texture makes a nice modern ceiling or wall finish. …

How to add texture to a drywall ceiling?

1 Mix the joint compound (drywall mud) 2 Using the roller apply the sufficient thickness of joint compound on to the ceiling. 3 In case there are too many patch works on the ceiling, consider priming before you add texture.* 4 Before the mud dries, pick the roller with desired texture 5 Dampen the roller before you start you work.

What kind of compound is used to texture ceilings?

Drywall compound, commonly referred to as mud, textures ceilings in a wide variety of patterns.

Can a drywall compound be applied over an existing texture?

The neat thing about drywall compound, also called joint compound or just “mud,” is that you can apply it over existing walls to smooth away roughness or for use as a new drywall texture. The compound, which goes on wet, adheres to nearly any porous surface, but in some cases, you need to do some prepping before you can apply the compound.

Can you use drywall joint compound on a ceiling?

Refresh old designs with a different texture or create one from scratch using drywall joint compound. Buy joint compound in 5-gallon buckets. You will need to add water to thin it for application to a ceiling. You don’t even need to add paint if you want a white ceiling, and it will look good for many years. Prepare the room from top to bottom.

Drywall compound, commonly referred to as mud, textures ceilings in a wide variety of patterns.

How much does joint compound cost to texture a ceiling?

Inspect the ceiling once it is dry, and add additional plaster to fill in hairline cracks. One of the main reasons drywall professionals use joint compound to texture ceilings is cost. According to Home Depot’s 2011 prices, a 5-gallon bucket of premixed joint compound costs about $10 to $12. Most ceilings are relatively small in space.