Can I use floc with a cartridge filter?

3. Use Pool Flocculant (Floc) A chemical known as flocculant, or floc, is a good idea if you’re in a rush, or would like to see your swimming pool water cleared quickly. Again, flocculant should be avoided if you are using a cartridge filter as it will clog the paper pleats.

When should I use flocculant in pool?

If you’re planning a pool party in a few hours, or if your pool is super cloudy and dirty, then flocculants are definitely the way to go. You can pour them in and get to cleaning. But if you’re not in any hurry, a clarifier is a better option because you simply pour it in and let it work.

How do I add a flocculant to my pool?

Turn Your Pump onto “Recirculate” Set the valve to recirculate and switch the pump on. Run it for a few hours. This will distribute the flocculant evenly throughout the pool water. Do NOT set it to filter.

Can I shock and floc at the same time?

While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless.

What does flocculant do in a pool?

Pool flocculants, also known as flocc, make quick work of clearing up your cloudy pool water. After being added directly to the pool water floc causes cloudy water particles to clump together and sink to the bottom of your pool. Your job is to then vacuum the clumped up “clouds” from the bottom of the pool and voila!

How often should you floc a pool?

You should be turning your pool over – moving your entire pool volume through your filter – at least twice a day (three times a day for a commercial pool). The easiest way to deal with cloudy water is to use a water clarifier.

How often can you floc a pool?

What happens when you use a flocculant on a cloudy pool?

After dropping in the flocculant, cloudy particles bind together, and the larger particles sink to the bottom of your pool. This will result in the water being clear, but now the bottom of your pool is dirty. Remember, despite the clear water, the floor of your pool is now covered with sunken algae.

How to use alum as a flocculant in pools?

HOW TO USE ALUM as a FLOCCULANT in SWIMMING POOLS. Buy Aluminum Sulfate online, or find at a local garden center. Skim, vacuum and brush the pool to remove large debris. Balance pool pH, Alkalinity, Calcium, Chlorine and Cyanuric acid levels. Broadcast 4 lbs of Alum over the pool surface, per 10,000 gallons.

How long to let pool water sit still after adding flocculant?

After the flocculant has been added, let the pool water sit still for 24 hours with the pump off. This will allow the debris and algae to sink to the bottom. This waste will need to be vacuumed through the waste valve.

What kind of particles are in pool flocculants?

The flocculants clump together floating particles in the water that are too small and light to sink to the bottom to be vacuumed up. Those particles usually include stuff like bacteria, viruses, algae spores, and other microscopic debris.

What do you need to know about pool flocculants?

What is Flocculant? Flocculant, or pool floc as it’s sometimes called, is a chemical that you add to your pool when other methods of clearing it up aren’t working. The flocculants clump together floating particles in the water that are too small and light to sink to the bottom to be vacuumed up.

Can you use alum as a flocculent in pool?

Put Multiport valve on Recirculate and run pump for 2 hrs; Brush pool. Turn pump off for 12-24 hours, or until the Alum settles to the pool floor. Place Multiport valve on Waste, and vacuum to waste, the settled Alum. You must be able to vacuum to waste.

How to clean a cloudy pool with a clarifier?

1 Drop the Clarifier Into Your Pool. After dropping in the flocculant, cloudy particles bind together, and the larger particles sink to the bottom of your pool. 2 Vacuum Out the Waste After the flocculant has been added, let the pool water sit still for 24 hours with the pump off. 3 Understand Your Valve or Filter

What’s the difference between a flocculant and a clarifier?

A topic that often causes confusion among new pool owners is the difference between flocculant vs. clarifier. Both of these products are designed to remove tiny particles from your pool and make it crystal-clear, removing cloudiness and debris. But what’s the difference between each one, and which one should you be using?