Can vinyl flooring go over plywood?

Can I install vinyl flooring over wood, plywood, particleboard or chipboard? You can install vinyl over wood floors if you put a plywood subfloor on top of it. Do not install glue down or peel and stick products over particleboard, chipboard or any form of embossed floor.

How do you prepare plywood for vinyl flooring?

Here’s what I would do under ideal circumstances:

Spend some time screwing down the existing floor to the joists.
Get some 1/8″ Hardboard, Lauan or birch plywood (one side smooth) and lay it down without gaps over the sub floor.
smooth any edges/fill any gaps.
Lay your vinyl.

How do you prepare wood subfloor for vinyl?

Vinyl Subfloor

Clean the old vinyl with a household floor cleaner. Alternatively, mix a few drops of dish detergent in water to clean the floor.
Apply floor patching compound to any cracks in the old vinyl to create a smooth surface.
Vacuum any dust and debris from the floor.

Can luxury vinyl be installed over plywood?

Yes, provided it meets the specifications required for subfloor preparation. Consider using a surface preparation product to provide a smooth surface on which to install the luxury vinyl. …

What do you put down before vinyl flooring?

Before cutting your vinyl, place a scrap piece of plywood underneath to keep the subfloor from being damaged. A clean garage floor is a good place to cut vinyl flooring to size.

Can a plywood floor conform to a vinyl floor?

This means that over time, it will conform to the shape of the floor beneath. This means that you will see grooves in the vinyl where there are gaps between the plywood sheets. This means you want the sub-floor to be as smooth as possible.

How to prepare a plywood subfloor for vinyl sheet?

Spend some time screwing down the existing floor to the joists. This is likely the only opportunity you will have to do so. Get some 1/8″. Hardboard, Lauan or birch plywood (one side smooth) and lay it down without gaps over the sub floor. At this thickness, you can staple it down. smooth any edges/fill any gaps.

What should I use to prepare my floor for vinyl?

You’ll need to fill cracks between existing vinyl flooring materials with patching compound. Cement-based mixes work best for leveling grout lines when dealing with existing tile floors. Sand these areas to ensure a smooth, level surface all over. Moisture content matters when installing luxury vinyl flooring over existing materials.

Do you need gaps between plywood and vinyl?

This means that you will see grooves in the vinyl where there are gaps between the plywood sheets. This means you want the sub-floor to be as smooth as possible. BUT!!!! you need gaps between the sheets to allow for expansion or else you risk having the sub-floor develop a slight buckle. Here’s what I would do under ideal circumstances:

What type of plywood to use for a subfloor?

Plywood has been a standard subfloor material since the 1950s and remains the preferred subflooring for many builders. Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring.

What size plywood do I use for a subfloor?

The thickness of your plywood subfloor depends on the joist spans. The National Wood Flooring Association recommends a minimum plywood panel thickness of 7/8-inch for joist spans of 19.2 to 24 inches, and a minimum plywood panel thickness of 5/8-inch for joist spans of 16 inches or less.

What is floor prep?

Floor prep means preparing the floor to receive flooring material. Depending on the material the amount of floor prep can vary. Vinyl sheet goods will require a more finished substrate that carpet installed over a cushion.