Can you build an outdoor fireplace on a wood deck?

Adding a fireplace to a deck can enhance this perception, increase the use of a deck in cooler weather and provide an alternative place to cook for nature lovers. With appropriate planning and attention to detail, homeowners can easily install outdoor fireplaces on their wooden decks.

Can you out a fireplace on a deck?

Deck fireplaces are a great option for any homeowner looking to add a warm and welcoming gathering place to their outdoor living area. They can increase the ambience of any deck, provide a natural entertaining spot, and even serve as a cooking space.

How far does an outdoor fireplace have to be from the house?

10 feet
Choose the location with safety in mind. Your patio fireplace should be located at least 10 feet away from structures and flammable materials. When this is not possible, such as in the case of a patio with a wood cover or a mature tree growing nearby, you will need to take additional precautions to reduce fire risks.

Does an outdoor fireplace need a chimney?

A wood outdoor fireplace requires a chimney that’s large enough to provide an adequate draft to let the fire burn correctly. A gas fireplace requires proper venting and a gas line.

What direction should an outdoor fireplace face?

Instead, an outdoor fireplace should be placed off to one side so that the view remains open. Rather than placing the fireplace directly opposite the view, forcing guests to toggle their attention 180 degrees between fire and vista, a fireplace can be placed at 90 degrees, allowing enjoyment of both.

What do you put under fire pit on deck?

Use Pavers Underneath the Fire Pit There are specially made fire pit mats, which are made to withstand the extremely high temperatures a pit can reach. Or simply arrange pavers or bricks in the area where your fire pit will be placed. These will protect the deck from being damaged by high temperatures.

Is a fire pit safe on a wood deck?

Don’t: Never place your fire pit directly on a wood deck. The heat, flying sparks, and ash can seriously damage your deck and can also lead to a dangerous fire.

How much space does a masonry chimney need?

As Carson Dunlop Associates [at REVIEWERS] sketches (above) illustrate, proper masonry construction leaves space between wood framing members and the chimney, or where framing rests on or in a masonry chimney, at least 12″ of solid masonry should separate the chimney flue from the nearest wood framing member.

What should I remove when building a chimney?

Remove all excess mortar from the interior of the flue liner. When constructing the chimney around the flue liner, an air space must be maintained between the chimney wall and the flue liner of not more than the thickness of the flue liner wall.

Can a chimney be used to support wood framing?

Inspectors of older homes often find wood framing built right against masonry chimneys and at times we find wood framing that rests in a pocket in a masonry chimney structure, using the chimney to support the building framing. First of all – Congrats on a very extensive website!

What kind of mortar do you use to build a chimney?

For fireplaces, the flue is constructed directly over the fireplace. For appliances, the flue starts no less than 8 inches below where the appliance hooks into the flue. Flue liners are installed by neatly embedding one on top of the other in non-water soluble refractory mortar using a 1/16 to 1/8 inch mortar joint.

What kind of fire clearance do you need for a masonry chimney?

This article describes the fire clearances required for masonry chimneys. The distance between a brick, stone, concrete block,or other masonry chimney and the nearest combustible material, such as wood framing, is an important fire safety consideration that must be respected.

Do you need to seal off space around chimney?

No builder wants to leave 2″ of air space around the chimney, through the roof, blocked off with only fire stopping and roof flashing. They want to seal off and insulate that space. And many custom builders want to trim the masonry chimney with wood. Older fireplaces and chimneys were usually built in contact with combustibles.

What are the building codes for masonry chimneys?

Masonry Chimneys, refers to Chapters 23, 29, and 37 of the Building Code. “Rooftop View Turns to Darkness,” Martine Costello, Josh Kovner, New Haven Register, 12 May 1992 p. 11: Catherine Murphy was sunning on a building roof when a chimney collapsed; she fell into and was trapped inside the chimney until rescued by emergency workers.