Can you fix a washer agitator?

When that happens, the washing machine agitator dogs won’t rotate. The parts are cheap (less than $5 at appliance repair stores) and the repair is easy. If your washer has a fabric softener dispenser, remove it and unscrew the ratchet assembly retaining bolt. Then lift the agitator out and tip it upside down.

How do I tighten my washer?

Press the motor into the washing machine and downward or toward the edge of the appliance. With the motor pressed firmly in place, tighten the mounting nut by turning the wrench clockwise. Keep a finger on the belt; when you can depress it only about 1/2 inch with your thumb, you have reached proper tension.

How do you reinstall an agitator on a washing machine?

Now its time to reinstall with the agitator! You have to slide the agitator back into place and replace the screws and so as the bolt so it is secure. You should take the string and lower it down into the range of the central pole. Your agitator should settle right into the bottom.

What to do if your washing machine is malfunctioning?

With the knowledge of why your washer is malfunctioning, you’ll be able to plan your next step in how you’ll resolve the problem. As always, whenever you work on electrical appliances, safety should be a top concern. Remove the power source to the washer before troubleshooting or attempting repairs.

Where is the dust cap on an agitator?

Depending on the model, you may need to pull out a dust cap which rests just inside the top of the agitator. Secure the agitator base and, if applicable to your model, use a long socket wrench to unthread the mounting bolt securing the agitator to the drive shaft.

Why is the basket agitating on my washing machine?

Within the washer’s transmission there’s a crank type gear with connecting rods that cause the basket agitate. If there is little or no agitation, the splines that connect the agitator to the drive shaft could be stripped and in need of replacement. In some washers a reversing motor is used.

How do you remove an agitator from a washing machine?

With the bolt sufficiently loosened, you can pull the agitator straight up to remove. Alternatively, on some models where the agitator has an upper and lower section, you may need to use a square drive bit to unthread a retainer that will allow you to pull the upper portion of the agitator off first.

Where can I get help repairing my washing machine?

If you need professional repair help, schedule service online or call 1-800-344-1274. Watch as Maytag ® appliance experts walk you through how to install your new washer. Learn how washing machines are using low water levels for a deep clean and optimal results.

What should I do if my washing machine is not working?

How To Repair A Washing Machine Yourself When your washer isn’t working right, the solution may be as simple as switching up detergents, tightening a hose or leveling the appliance. Some issues will require professional help so it’s important to know what you can do yourself and what you’ll need a service call for.

What makes a top load washing machine agitate?

The transmission in a top load washer is responsible for converting the rotating motion of the motor to the back and forth motion for the agitator. The transmission has an input shaft that is driven by the motor either directly or by a belt, as well as an output shaft to drive the agitator.