Do gas fireplaces need to be refilled?

Natural gas is a clean-burning gas; this means that it is more environmentally friendly than some other methods. It is also the most common fuel used for gas fireplace installations. Natural gas does not need to be refilled as it can come straight from the gas line.

What do you fill a gas fireplace with?

Supplies Needed To Freshen Up Your Gas Fireplace

Silica Sand (not needed for a propane fireplace)
Vermiculite (optional for natural gas fireplace)
Rock Wool.
Platinum Embers (optional for more dimension)
Lava Rock.

How do you refresh a gas fireplace?

Glowing faux embers and a bed of coal are among the enhancements that can give your gas fireplace a nice upgrade….Replace Your Gas Logs

Blue, green, red, and yellow fire glass.
Charred wood style ceramic fiber logs set.
Birch and oak style ceramic fiber logs set.
Colored fire stones.
Geometric shapes.

What is the difference between gas logs and gas inserts?

Unlike gas logs, inserts produce a lot of radiant heat and warm air. If you are going to rely on the fireplace as a source of heat, a gas insert will be better for you than a gas log. However, gas inserts will usually produce less heat than a built-in gas fireplace.

Can you put rocks in a gas fireplace?

You can have this look in your gas log fireplace by adding Lava Rocks to the floor of the fireplace. Not just for decoration, lava rocks hold and radiate heat longer and save energy. Fire rocks are used in natural gas fireplaces or in natural gas or propane burning fire pits.

What goes at the bottom of a gas fireplace?

That looks like rockwool. It glows when it’s engulfed in the gas burner flames to represent glowing embers. There is a sand base in the burner to diffuse the gas if you’re burning NG. With LP gas that base material is usually vermiculite.

Can a TV be mounted over a gas fireplace?

The short answer is – yes. However, to ensure your television isn’t damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. There are several ways to do this, such as installing a proper mantel and building an alcove for the television.

When should I replace my gas fireplace?

When to Replace a Gas Fireplace

The fireplace is out of date.
It needs significant or constant repair.
You also want to replace or update the facing or surround material.
You plan to sell your home.
You want to use your fireplace more.
You want the latest gas hearth features.

How much does a gas insert cost?

A gas-burning fireplace insert heats 1,000 to 3,000 square feet, depending on its size. Talk to your insert dealer about the size of your existing fireplace and what heating capacity you can expect from an insert. Inserts cost $3,000 to $4,000, including installation and a chimney liner.

How do you get air out of a gas fireplace?

While pressing the valve control knob in, press the igniter button repeatedly until the pilot ignites. This could take anywhere from one to 10 minutes to bleed air out of the lines as the gas starts to flow. Once the pilot is lit, continue to press the valve knob inward for 30 seconds before releasing it.

What’s the best way to install a fireplace?

Outside, install the exterior fire stop and drip cap using appropriate tools for your type of exterior wall. Hire licensed contractors to install and connect the gas line and electricity. Depending on where you placed your fireplace, you may need to run new electrical outlets and you will almost certainly need to run a new gas line.

What can I use to fill in the bottom of my fireplace?

You can fill in the fireplace with thermalite blocks and bricks and then plaster over. The key is to ensure the chimney is capped at the top with a ‘pepperpot’ cowl so no water can enter the flue. In addition, if the back of the fireplace is subject to damp,…

Do you have to clean your gas fireplace?

With safety on the line, having an inspection completed is a no-brainer. Yes, you can clean your gas fireplace yourself, but it’s important to read the manual and make sure you follow all of the steps correctly, prioritizing safety.

What’s the best way to clean glass on a gas fireplace?

Use fireplace glass cleaner to clean the glass covering of your gas fireplace. Spray the cleaner on a dry cloth and rub it in a circular motion on the glass. If the glass has a lot of dirt and grime on it, spray the cleaner directly on the glass and rub it off using newspaper.

Where is the shut off valve on a gas fireplace?

Locate the shut-off valve assembly of the gas line to your fireplace. Open the valve assembly by turning it parallel to the gas line. Then, locate the pilot assembly, either in the bottom of the fireplace box or in back of the logs.