Info

Guidelines

# Do use of fiberglass insulation in the outer walls of a building is intended to minimize heat transfer through what process?

## Do use of fiberglass insulation in the outer walls of a building is intended to minimize heat transfer through what process?

The use of fiberglass insulation in the outer walls of a building is intended to minimize energy transfer through what process? kinetic energy being added to the particles of the substance. Which of the following best describes the relationship between two systems in thermal equilibrium? No net energy is exchanged.

## Which of the following is proportional to kinetic energy of atoms and molecules?

The temperature of gases is proportional to the average translational kinetic energy of atoms and molecules. The motion of individual molecules in a gas is random in magnitude and direction.

## Why does sandpaper get hot when it is rubbed against rusty metal *?

Why does sandpaper get hot when it is rubbed against rusty metal? Energy is transferred from the sandpaper into the metal. Energy is transferred from the metal to the sandpaper. Friction between the sandpaper and metal increases the temperature of both.

## Which of the following is needed for energy to transfer as heat between two objects?

Energy transfer as heat between two objects depends on which of the following? The difference in temperature of the two objects. In the prescience of friction, not all of the work done on a system appears as mechanical energy.

## Which of the following is the equivalent of 88f?

88 F to Celsius

Temperature Converter
Choose 2 units:
Fahrenheit Celsius Kelvin Rankine Delisle Newton Reaumur Romer
=
88 degrees Fahrenheit equals 31.111 degrees Celsius Use the folowing formula to convert from Fahrenheit to Celsius: [°C] = ([°F] − 32) × 5⁄9

## Which of the following is not a mode of heat transfer?

Radiation is one type of heat transfer but it transfer without any medium. So Radiation, Conduction and Convection are 3 basic types of heat transfer and induction is not a mode of heat transfer.

## What are two assumptions of the kinetic molecular theory?

The simplest kinetic model is based on the assumptions that: (1) the gas is composed of a large number of identical molecules moving in random directions, separated by distances that are large compared with their size; (2) the molecules undergo perfectly elastic collisions (no energy loss) with each other and with the …

## What is the effect of temperature on kinetic energy of molecules?

If the temperature is increased, the average speed and kinetic energy of the gas molecules increase. If the volume is held constant, the increased speed of the gas molecules results in more frequent and more forceful collisions with the walls of the container, therefore increasing the pressure (Figure 1).

## When a drop of ink mixes with water what happens to the entropy of the system?

When a drop of ink mixes with water, what happens to the entropy of the system? The system’s entropy increases, and total entropy of the universe increases.

## What way does heat always flow?

Heat energy always flows from the warmer object to the cooler object. Heat always flows from a warmer object to a cooler object (Let’s Talk Science using an image by VectorMine via iStockphoto). Heat can be transferred in three ways: Conduction.

## What are 5 examples of energy transfer?

Energy transfers

• A swinging pirate ship ride at a theme park. Kinetic energy is transferred into gravitational potential energy.
• A boat being accelerated by the force of the engine. The boat pushes through the water as chemical energy is transferred into kinetic energy.
• Bringing water to the boil in an electric kettle.

## What makes fiberglass insulation less effective than other insulation?

Heat energy doesn’t move through ceilings and walls alone, but also through direct air exchange (take air leaks through a ceiling into an attic, for example). Fiberglass is less dense and less effective against air leaks than other forms of insulation, including loose-fill cellulose or sprayed foam. Moisture.

## What kind of fill is used for fiberglass insulation?

Even though it is usually found in blanket form (called batts), fiberglass is also available in bags of loose fill. The batts come in standard pre-cut lengths and widths and the homeowner typically staples them into place. You can find batts in different thicknesses – the thicker the batts, the higher the resistance to heat flow.

## What’s the heat resistance of a fiberglass ceiling?

You can find batts in different thicknesses – the thicker the batts, the higher the resistance to heat flow. This heat resistance is called R-value; most common R-values for walls range between R11 and R19, while ceilings go as high as R30 to R38.

## What kind of insulation is used in homes?

In homes, fiberglass insulation is extremely useful at protecting certain parts of the building envelope from the outside weather. It comes in pink, white, yellow, or green, and, depending on the manufacturer, has more or less of a spongy feel.