Do you need to oil oak worktops?

Before you install your solid wood worktop, it’s really important to oil every surface of the wood to protect it once it has been installed. In between each coat, let the oil dry thoroughly and follow with a light sanding to help the next coat adhere. Oiling immediately after installation.

How do you oil an oak worktop?

Use linseed or Danish oil (available from DIY stores) and a lint-free cloth – microfibre works well. Pour a little oil directly onto the worktop and, using the cloth, spread it over the surface until you have a very thin and even layer. Keep going until you’ve covered all your worktop, then apply another coat.

Can I use Danish oil on oak worktops?

If you have a solid wood worktop, it is important to maintain it properly. We recommend oiling worktops as this provides a layer of protection that will make the surfaces water resistant whilst maintaining a natural look – Danish oil is particularly good for this.

How do you restore oak kitchen worktops?

To really revive a wooden worktop I’d start by giving it a light sand. This is best done with an electric sander, but can also be tackled by hand if you’re feeling strong and have patience. Choose a coarse grade such as 80gsm and then go over again with a finer grade, for example, 120gsm.

How often should I oil my oak worktop?

With regular oiling, real wood worktops should last for many years and will continue to mature in colour as you apply fresh coats of oil. It is recommended that for the first six weeks after installation, your worktops are oiled as regularly as possible, then approximately every three months thereafter.

What is the best oil to use on oak worktops?

Linseed or Tung Oil Pure linseed oil or tung oil are better suited for treating hardwood worktops as they penetrate timber more effectively than other natural oils. Though it may take a long time, these rub-in oils will naturally dry or cure on their own.

Do you sand between coats of Danish oil?

Danish oil dries slowly, so wait overnight before recoating. And it goes on thin, so apply a minimum of three coats. You don’t have to worry about brush marks, but you’ll get an even smoother finish by lightly “wet” sanding between the second and third coats.

Does Danish oil darken wood?

A superior penetrating linseed oil finish that is polymerized for fast and easy application on interior woodwork and furniture. Danish Oil will darken the wood slightly and can be combined with oil-based pigments to create wood stains. …

How do I get my worktops to shine again?

Glossy

Clean the surface with soapy water and an ammonia-based cleaner (i.e. Softscrub, and avoid cleaners that leave behind residues.)
For extra shine, clean with an abrasive household cleanser like Ajax or Comet and apply gently with a sponge.
Do this once a month to maintain the original level of gloss.

How to select the best worktop oil for your wooden worktop?

Creating the Best Finish. To give your wooden worktops the best possible finish, we recommend utilising Worktop Express Danish oil for worktops for all worktop oiling and aftercare. We advise that you apply at least two – three coats on both the top and bottom surfaces of the worktop, four coats on each edge and six coats on the end grain.

What kind of wood to use for kitchen worktops?

A popular choice for a new kitchen worktop is lighter coloured wood such as oak. For these types of wood, Oil is one of the best finishes to use on its surface. Oil brings out the natural beauty of wood and its grain, whilst offering the essential protection required.

What kind of lacquer to use on wood worktops?

From oils and waxes, to varnishes and lacquers it’s often difficult to judge what coating is appropriate for your new wooden surface. This decision usually comes down to the type of wood it’s made from. A popular choice for a new kitchen worktop is lighter coloured wood such as oak.

How do you re-coat a wood worktop?

To re-coat the worktop, lightly sand the top surface and then apply the oil. Apply more coats if the worktop is still dry after the first coat. To test the surface of the worktop for resistance, drop a bead of water onto the surface, if the water sits in a large bubble and does not spread out, you have successfully re-oiled your worktop.

What kind of wood do you use for kitchen worktops?

Kitchen worktops come in a huge variety of materials and styles, from man made laminate and composite materials to natural materials such as stone, granite, quartz and wood. All of which give a very specific look and feel and while some worktops can be relatively cheap, others can cost thousands.

What’s the best way to oil a kitchen countertop?

Preparation: once you’ve sanded down the countertop, brush it down and then wipe it down few times with paper towel or something smooth and soft. AVOID water and liquid. Once you have removed as much dirt/dust off the worktop you now are ready for oiling. Loading…

What’s the best way to coat a wood worktop?

Try to always work in the direction of the grain and work the oil outwards with a clean, dry, soft cotton cloth. Aim to achieve a thin, even covering across the whole area of your worktop. Each time you apply a coat, leave it for about ten minutes and rework it with your cloth to get a nice, even coating.