Does PS3 have Wi-Fi built-in?

Connecting your PlayStation 3 to a wireless network is the first step to joining in the world of online gaming. Almost all versions of the PS3 (all except the 20GB) have a built-in wireless capability. Make sure that your wireless router is connected to the Internet and broadcasting a signal.

Where is the PS3 Bluetooth located?

Select (Settings) > (Accessory Settings). Select [Manage Bluetooth® Devices]. If you have registered one or more Bluetooth® devices, a list of registered devices is displayed. Select [Register New Device].

What is error code 8002f1f9 for the PS3 mean?

Test your Hard Disk Drive (HDD) “PS3 update error code 8002f1f9”, may be caused by a defective hard disk drive. To test your PS3, you need a desktop to connect to and run a hard disk software test. If you find that the HDD is indeed defective after the test, consider buying a new one if your PS3 is out of warranty.

Can you upgrade PS3 Wi-Fi?

You can try a better router, or pull a wire through the wall, either to hardware the PS3 or set up another access point. Those are your choices.

What is the WPA key for Wi-Fi on PS3?

If a device that supports remote play is registered with a PS3™ system that is equipped with the wireless LAN feature, a network connection for remote play with a specific SSID and encryption key (WPA key) is automatically created for both systems, and the systems are able to communicate with each other in …

How do I remove the Wi-Fi/Bluetooth board from my PS3?

Be sure you are prying up on the retaining flap, not the socket itself. Pull the Wi-Fi/Bluetooth ribbon cable out of its socket. Remove the four 9 mm Phillips screws securing the Wi-Fi/Bluetooth board to the chassis. Remove the Wi-Fi/Bluetooth board from the PS3, minding any cables that may get caught.

How do I change the Wi-Fi on my PS3?

Pull the Wi-Fi/Bluetooth ribbon cable out of its socket. Remove the four 9 mm Phillips screws securing the Wi-Fi/Bluetooth board to the chassis. Remove the Wi-Fi/Bluetooth board from the PS3, minding any cables that may get caught.

Are the WIFI/BT cards on the PS3 fat removable?

Note: Only the first 2 generations of PS3 fats have removable Wifi/BT cards. If you have a third generation fat (VER-100 motherboard or later) the Wifi/BT chips are integrated into the board and thereby NOT removable.

How do I remove the Wi-Fi/Bluetooth ribbon cable from the chassis?

Use your fingernail to flip up the retaining flap on the Wi-Fi/Bluetooth ribbon cable socket. Be sure you are prying up on the retaining flap, not the socket itself. Pull the Wi-Fi/Bluetooth ribbon cable out of its socket. Remove the four 9 mm Phillips screws securing the Wi-Fi/Bluetooth board to the chassis.