Does the fridge dial control the freezer?

Locate the dial which is situated at the top, or in the middle of the fridge or freezer section. Note: This dial controls both the fridge and freezer temperatures. Note: We recommend the average temperature inside the fridge to be around 4°C to 5°C and the freezer temperature to be around -18°C.

How do I turn my fridge off?

Pull the refrigerator away from the wall so you can access its water shutoff valve. Turn the valve to the off position. Unplug the refrigerator or turn off the fuse that powers it. If it has a water dispenser, locate the reservoir, which should be behind the produce drawers.

What controls the thermostat in a fridge?

In most commercial refrigerators, the thermostat has a capillary tube filled with gas. As the temperature in the fridge increases, the gas expands and pushes on a diaphragm, which operates a set of contacts which in turn operates the compressor.

Where is the Main Control Board on a refrigerator?

How to inspect a refrigerator’s main control board: Disconnect your refrigerator from the power source, you will be inspecting electrical components. The main control board is usually found inside the control box, which is inside the fridge, attached to the top or side of the fridge. Locate and remove the main control board from your appliance.

What to do if your refrigerator goes blank after a power outage?

Usually after a power outage your refrigerator will reset itself. The fridge and freezer section should be working just fine after the power outage. The only issue is the digital display panel will not be lit. Some refrigerators may not begin cooling again and the reset needs to be done once power is restored.

What to do when your refrigerator freezer shuts off?

Disconnect the power cord from the wall outlet. You may hear knocking noises or a whoosh sound as the power shuts off. Leave the refrigerator unplugged for a few minutes. Turn both the fridge and freezer controls to “Off” or “0” inside the fridge. Plug the fridge back into the power outlet.

Can a defective control board cause a refrigerator to be too cold?

A defective control board could cause a symptom of the fresh food compartment being too cold, but you should first eliminate the sensors and the damper before changing the control. Some manufacturers may provide detailed information on the procedure for testing the board and the sensors. How to inspect a refrigerator’s main control board:

Where do I find the Control Board on my fridge?

The following information is provided to help with identifying the control board you have on your Dometic fridge. These charts give general reference. We recommend that you get the exact board number that is installed in the fridge for reference for replacement or troubleshooting of your fridge.

Which is the Best Fan Controller for a refrigerator?

Product Description: We have two models of controller; Dometic and Norcold Fridge Defend Basic or Fan Controller . Both controls protect the cooling unit by monitoring the boiler temperature. The Fridge Defend + Fan Control has an an additional fan controller which improves the fridge efficiency.

How to troubleshoot the back of a Dometic refrigerator?

Okay, now let’s move on to trouble shooting techniques. Check all the circuit breakers and fuses. Check the outlet on the back of the refrigerator. Use a multi meter to check for power voltage. If the voltage checks out okay and all lights work, then check the electric heating element. Beware this has dangerous voltage…. Check the flame.

Where can I find the Dometic Control Board cross reference?

Dometic Control Board. We have added this Dometic control board cross reference chart to help our customers with Dinosaur controls and Dometic safety using the Fridge Defend Control. The following information is provided to help with identifying the control board you have on your Dometic fridge. These charts give general reference.