How big of a bar can I put on a Stihl 026?

According to Stihl, a bar between 16 and 20 inches will be optimal for the 026 model.

What is the difference between 026 and 026 pro?

The 260 has the flippy oil and gas caps, the 026 saws had screw in oil and gas caps. The only difference between the PRO and non PRO 026 and 260 saws are that the PRO saws have an adjustable oiler and a decompression valve. And the PRO sticker. There were no other differences.

How much does a Stihl 026 weight?

The 026 weighs about 4.9 kilograms (10.8 pounds) with the bar on. The 028 weighs about 5.9 kilograms (13.2 pounds). So the 026 is definitely much lighter but has less power than the 028, which has a slightly bigger engine.

How do you adjust the carburetor on a Stihl 026?

Start by setting the H & L carb screws to the default factory nominal setting. On the 026/260 that means turn the screws in and seat them *gentley* until the screw stops, and then back them off. Back the H &L screw both out one full turn. Start the saw and run it to warm it up with the bar and chain on it.

What size bar does a Stihl 021 take?

2-Pack 16-Inch Chainsaw Guide Bar Replacement for Stihl 021 – (16″, 3/8″, . 050″, 55 Drive Links) – Walmart.com.

Is Stihl 026 the same as 260?

The only real difference may be the fuel caps and air filter.

What replaced the Stihl 026?

MS 261
The MS 261 model replaced the Stihl 026.

What spark plug does a Stihl 026 use?

NEW Genuine NGK Spark Plug BPMR7A 2-Pack STIHL 026 028 MS250 MS290 MS310 MS390 | eBay.

Is the Stihl 026 a good saw?

Ultimately, the Stihl 026 is a reliable chainsaw. All you need to do is make sure you purchase one in good working condition, and you’ll be good to go.

Can I put a 20 bar on ms271?

Heavy-Duty Chain Saws All of these models — which include the MS 271, MS 291, MS 311 and MS 391 — can take guide bars between 16 and 20 inches.

What size guide bars do you need for a Stihl 026 chainsaw?

The 026 can work with guide bars of a variety of different lengths. However, Stihl recommends using bars that are between 40 and 50 centimeters or between approximately 16 and 20 inches in length. According to Southwest Trading, the Stihl 026 chainsaw weighs 10.6 pounds.

What is the engine size of the Stihl 026?

The Stihl 026 is made of die-cast magnesium and injection mold polymer. 48.7cc engine 3.5 horsepower Best with a 14 – 16 inch bar

What is the difference between a Stihl MS 260 pro and 026?

According to the official Stihl website, the new MS 260 Pro chainsaws have engine displacements of 50.2 cubic centimeters (cc), or approximately 3.06 cubic inches. However, as the outdoors equipment resource website Southwest Trading notes, the older 026 models have engine displacements of 48.7 cc, or approximately 2.97 cubic inches.

What size bar do you need for a Husqvarna 026?

According to Stihl, a bar between 16 and 20 inches will be optimal for the 026 model. Chain saws are quite literally chains that are covered in blades, and they spin at high speeds with minimal protective elements. As such, Husqvarna explains that practicing safe operation is absolutely critical.