How close can I put my wood stove to the wall?

The standard clearance recommended by the National Fire Protection Agency is 36 inches. This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood.

What is the minimum clearance for a wood stove?

36-inch
All stoves require a minimum 36-inch clearance to unprotected combustibles above and on all sides of the stove. A single wall stovepipe must have a clearance to combustible walls and ceilings, measured at right angles to the pipe of at least 18 inches. No clearance is needed to noncombustible walls (i.e., concrete).

How close can a wood stove be to cement board?

A combustible floor must be protected by a non-combustible material (like tile, concrete board, or certified to UL-1618 or as defined by local codes) extending beneath the heater and a minimum of 6″ from each side and minimum 16″ from the front face of the stove and minimum 6″ (or the rear clearance to combustibles …

What is considered a non-combustible wall?

Non-combustible materials are building materials that do not burn or ignite when subjected to expected levels of fire or heat. Examples of non-combustible materials include brick masonry, concrete blocks, hardy backer board, calcium silicate board, cement board, metal, and certain types of glass.

How close can a stove be to a wall?

There should be two inches of distance between the rear wall and a drop-in or slide-in (gas or electric) design range. A freestanding range (gas or electric) demands no space between it and the rear wall. There should be at least twelve inches between some fashion range and the nearest sidewall.

What is a heat shield for a wood stove?

Wood stoves require heat shields both under and behind them to protect your home from heat damage. While many wood stoves include heat shields in their design, some do not. Shields protect your home from heat damage and fire one of two ways.

How much clearance around a wood stove?

A wood stove requires a minimum 36-inch clearance from any combustible material on the top, sides, back and front of the device. If the stove is on legs, there should be a minimum of 6 inches of open space between the bottom of the firebox and the floor.

How far does a wood stove need to be from the wall?

Conventional wisdom says that all combustible materials — woodwork, unprotected walls, furniture, firewood, that stack of old newspapers you use to start the fire — should be 36 inches from the stove. An unprotected stove pipe should be at least 18 inches from an unprotected wall or ceiling.

Where should I put the wood stove?

Try to install it in the basement . Wood stove in the basement can heat the whole house. Since heat rises above and then circulates, it is wise to put the stove in a lower location. However, if you fail to do so, don’t worry. There are other alternatives as well.