How deep should closet rod be?
How deep should closet rod be?
12 inches
Opt for a closet rod depth of at least 12 inches. If you don’t leave sufficient space between the rod and the rear wall, one side of all garments will wrinkle from being bunched up against it. You can avoid this clothing disaster by mounting the rod at least 12 inches from the rear wall of the closet.
How long can closet rods go without support?
If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.
How do you support a closet rod?
Before installing a closet rod, it is best to place closet brackets in a position on the wall that allows for the most support. This will require a stud finder. Once wall studs have been located, closet rods and brackets can be screwed into the stud for optimal support.
How much weight can a wood closet rod hold?
The same length of rod can hold 170 pounds if it’s made of 1 5/16-inch steel polished chrome. On average, jeans weigh 1 1/2 pounds, shirts 1/2 pound and suits 4 pounds.
How far apart should double closet rods be?
When installing double rods, hang the top rod 80 inches from the floor and the bottom rod 40 inches from the floor. Leave at least 3 feet of space between the two rods. These systems usually work best for skirts, blouses, shirts or pants folded over a clothes hanger.
How much space should be between shelf and closet rod?
A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.
How much space do you need between closet shelves?
A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall. Shelves for women’s shoes should be spaced about 6 to 7 inches apart. Shelves for folded clothes should be placed around 12 inches apart.
Do closet rods need support?
You don’t need to hang it in a closet, of course. Closet Rod is available in custom lengths up to 96 inches. A center support is required for beams longer than 48 inches. Additional supports are recommended if the closet rod will be supporting especially heavy apparel (i.e. winter coats, heavy weight suits, etc.).
How much weight can an average closet rod hold?
A 6-foot span of closet rod can hold certain amounts of weight, depending on its shape and what it’s made of. Six feet of oval aluminum anodized rod can hold 45 pounds. The same length of rod can hold 170 pounds if it’s made of 1 5/16-inch steel polished chrome.
How high should the top shelf be in a closet?
84 inches
The top shelf in a closet is typically placed at 84 inches from the floor. If you use a 16 inch shelf depth you will only have 8 inches of open space between the front of the top shelf and the closet header. You will only be able to place items on the top shelf that will fit between that space.
How tall should a single Hang closet door be?
Answer: Single-hang height should be 70 inches from the floor; double-hang height is around 84 inches for the higher rod and 42 inches for the lower rod. Measure from the floor up to determine the height of your single-hang and double-hang rods.
How tall should a closet rod be in relation to the floor?
Use the bottom of the rod as a guide when measuring height. Plan to align the bottom of the closet rod with the 66-inch marking when mounting the rod—this means there should be a full 66 inches between the rod and the floor once you’ve installed it.
How tall should a shelf be in a closet?
It would be fairly inconvenient to install a shelf at a height that requires you to find a step stool or sturdy chair every time you needed a book or your favorite accessory. This puts the recommended shelf height between 87 inches and 96 inches off of the floor.
How tall should handrails be in a closet?
Handrail heights have moved up about 6″ in the last 100 years to accomadate the taller people of our time. The reference to shoulder height for closet rods, is a good idea (likewise, counters can be set at 3″ below the elbow).Anyway, some customers use the floor of the closet more often than the shelf above the rod.
Use the bottom of the rod as a guide when measuring height. Plan to align the bottom of the closet rod with the 66-inch marking when mounting the rod—this means there should be a full 66 inches between the rod and the floor once you’ve installed it.
It would be fairly inconvenient to install a shelf at a height that requires you to find a step stool or sturdy chair every time you needed a book or your favorite accessory. This puts the recommended shelf height between 87 inches and 96 inches off of the floor.
How tall should a clothes hanger be in a closet?
Measure 11-1/2″ from the rear closet wall. Next, determine the installation height of your rod. Allow sufficient height to insure your clothing hangs freely. Mark the position on each wall for pole sockets. Attach the pole socket to the cleat to allow for 2-1/2″ of space between the pole and a shelf above the cleat.
Handrail heights have moved up about 6″ in the last 100 years to accomadate the taller people of our time. The reference to shoulder height for closet rods, is a good idea (likewise, counters can be set at 3″ below the elbow).Anyway, some customers use the floor of the closet more often than the shelf above the rod.