How do I access my 3PAR Service Processor?

Accessing the service console login screen After the Service Processor has been initialized, user can log in to the service console by browsing to the SP IP address: https://:8443. Enter the user name and password, then click Login. The SP Overview screen is displayed by default.

How do I reset my 3PAR Service Processor password?

Under Service Processor – SP Control Menu, click SP User Access Control. 5. Under Service Processor – SP User Access Control Menu, click Change User Password.

What is service processor in 3PAR?

The HP 3PAR Service Processor monitors the HP 3PAR StoreServ 20000 and enables remote monitoring and remote servicing of the array. The Service Processor leverages the industry-standard HTTP over Secure Sockets Layer (HTTPS) protocol to secure and encrypt data communication.

How do I restart my 3PAR processor?

Rebooting the SP

On the main menu, select Service Processor.
On the Actions menu, select Reboot.
Follow the instructions on the dialog that opens.

How do I get an InSplore log?

Collecting 3PAR Insplore Logs

Open up a web browser and enter the IP address or hostname of the service processor connected to your 3PAR and logon with your service processor credentials.
On the left hand side of the screen click on support and then from the action area select the InSplore hyperlink.

How do I turn off 3PAR Service Processor?

Using SPOCC:

Select InServ Product Maintenenace.
Select Halt an InServ cluster/node.
Follow the prompts to shutdown an Cluster Do not shut down individual Nodes.
Turn off power to the node PCMs.
Turn off power to the drive enclosure PCMs.
Turn off all PDUs in the rack.

What is used to deploy a virtual service processor on Microsoft Hyper V?

Virtual Service processor (OVF Appliance) is supported on HP 3PAR StoreServ 7000 series and it can be deployed only on VMware vSphere hypervisor. 3, Virtual Service Processor can be installed on Microsoft Hyper-V Server 2008 R2 and Server 2012 in addition to VMware vSphere hypervisor.

How do I reset my 3PAR storage?

Log into the CLI and use the proper command for the desired operation:

shutdownnode halt
shutdownnode reboot

How do I collect 3PAR InSplore?

How do I check my 3PAR log?

To see 3PAR system event log, login to CLI and run the “showeventlog” command. The command is not interactive and it will scroll the screen till it reaches the end of the log file.