How do I adjust the temperature on my vape pen?

How do I adjust the temperature on my vape pen?

How do I change the temperature of my G Pen Pro Vaporizer?

1. Once the G Pen Pro Vaporizer has been powered on, you can cycle through its three temperature settings by simply holding the power button for three seconds.
2. Low (Blue) – 375° F / 190° C.
3. Medium (Green) – 400° F / 204° C.
4. High (Red) – 428° F / 220° C.

How do you change the settings on a vape pen?

Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you’re taking your hit.

How do I know when my vape pen is fully charged?

Simply connect the pen battery to the charger and insert into a USB port on a computer or other electronic device. The light on the battery and charger should illuminate, letting you know that it’s charging up. Once the light on the charger turns green, the battery is fully charged and ready to use.

What do the colors on the kind pen mean?

A: Red indicates the highest temperature (voltage) setting (3.2 volts). Blue indicates the medium setting (2.8 volts) and green is the lowest voltage (2.4 volts). A: Typically, a green blinking light will either indicate that your device needs to be charged, or you are holding the button down for too long.

What temperature should a dab pen be?

Most vaporizers intended for use with wax will have a range that starts around 315 °F. The temps for dabs concentrates are higher than for regular dry herbs. This is because wax won’t vaporize until it approaches about 315 degrees. A good range for vaping concentrates is generally 315 to 450 degrees Fahrenheit.

What do the numbers mean on a dab pen?

What do those numbers mean for you the vapor? General rule of thumb is the lower the ohm(lower the number) the harder the hit, more vapor, warmer the vape, and shorter the battery life before recharging.

How do you use a dab pen cartridge?

Press and inhale: Hold down the button on your battery while inhaling softly through the mouthpiece on the cartridge. You should see the battery light up and begin to feel vapor entering your lungs. You should see a small amount of vapor when exhaling, which lets you know the unit is working properly.

How long does it take for a dab pen to kick in?

Vaporizers and “dabbed” concentrates using a cartridge or concentrated cannabis oil have an immediate onset time with a duration of 1-2 hours.

How long does it take for a dab pen to charge?

Charging time depends on they size and type of your battery. Once your vape pen is plugged in, it can take as little as 30 minutes, but up to several hours to fully charge.

Why is my DAB pen blinking 10 times?

Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.

How do I change the color of my DAB pen?

Turn the unit on or off by pressing the button 5 times rapidly. To Change Voltage (vape battery has 3 temps – Low: green I Medium: blue I High: red): Clicking button 3 times quickly. Once on, hold down the button to enjoy your new Co2lors battery.