# How do I calculate how much lumber I need for framing?

Table of Contents

## How do I calculate how much lumber I need for framing?

Determine the number of studs needed by starting with a quick calculation for the general studs and adding studs for specific elements:

- Multiply the total wall length (in feet) by 0.75 (for 16-inch on-center stud spacing).
- Add three studs for each 90-degree corner.
- Add four studs for each 45-degree corner.

## How do you calculate lumber for a room?

You can measure board feet by multiplying length x width x thickness in inches, and then dividing by 144. If ordering a large amount by board feet, just multiply the total board feet needed by the price per board foot for the total cost.

## How big should a wall frame be for a new house?

Build your wall frames according to your new structure plans. Start at the present wall of your house. The wall frame will be built with boards that are 2 inches by 4 or 6 inches and cut to the height of your house addition plan. Boards that are 2 inches by 6 inches are often required to hold adequate insulation.

## How much plywood do you need to build a room?

They attach to the concrete foundation and may consist of any size from 2 by 4 to 2 by 12. A 12-by-12-foot room requires 36 board feet of sill plates, or five boards 8 feet long. Add an extra board for leeway. Tally the number of sheets of plywood the exterior wall frame requires if you build a room as a house addition.

## How big of a frame do I need for my floor?

If your floor is going to be 12 feet (3.7 m) x 18 feet (5.5 m), for instance, note that you’ll need a total of 4 12 ft (3.7 m) boards and 4 18 ft (5.5 m) boards for the outer frame, as well as multiple 18 ft (5.5 m) boards cut to size to serve as the main floor joists.

## How much does it cost to frame an addition to a house?

Framing costs generally range between $9 and $18 a square foot for an addition. Is metal framing cheaper than wood? No, metal framing costs between $14 and $36 a square foot and $9 to $18 a square foot for wood. How much does framing cost per linear foot? Framing is done by the square foot and costs between $9 and $18 a foot for wood.

## What kind of lumber do you need to build a 12×12 room?

Drywall or paneling is typically used on the walls and ceiling, so plywood isn’t needed for those. The exterior walls require 12 sheets of plywood. Eight-foot long 2-inch-by4-inch lumber is used for wall studs. A 12-foot-by-12-foot room requires 28. Buy a few in addition in case you discover flaws in one of the lengths of lumber.

## How big does a wall need to be to frame a house?

When it comes to wall framing, the bottom plate also can be 1⁄ 4in. or so short, but the top plate needs to be cut to exact length (again within 1⁄ 16in.) because it establishes the building’s dimension at the top of the walls. But the plate that sits on top of that, the cap or double plate, should be cut 1⁄

## How to calculate how much wood you need to build a wall?

Find the number of 2-by-4-inch wood boards you will use for wall studs. Each wall requires a stud every 16 inches; so calculate the wall lengths, together or separately, and divide the amount by 16. Increase the estimate with 2 additional studs for each wall section built for double stud beginnings and endings.

## How many sheets of plywood do you need to build a room?

The exterior walls require 12 sheets of plywood. Eight-foot long 2-inch-by4-inch lumber is used for wall studs. A 12-foot-by-12-foot room requires 28. Buy a few in addition in case you discover flaws in one of the lengths of lumber.