How do I calibrate my Hayward salt generator?

How do you calibrate a Hayward salt system?

Turn Salt System Off and On. With the pump running, take the power switch down to the “Off” position, and then back up to “Auto”.
Average Salt Reading. Wait until the numbers stop changing.
Assess the Salt Cell Reading.

How do I Turn Off the salt system on my Hayward aquarite?

Turn Salt System Off and On With the pump running, take the power switch down to the “Off” position, and then back up to “Auto”. You should hear a click within 10 or 15 seconds. When you do, press the diagnostic button five times in a row.

How to calibrate a Hayward Goldline chlorine generator?

1 Adjusting Salinity (Salt) level Before the chlorine generator can be calibrated correctly, the salinity—or salt level in the pool water—will need to be at the correct level. 2 Locating the Calibration Screen Once the salinity is adjusted to optimal level, the calibration process can begin. 3 Setting the Salinity Level

Why is the salt level on my Hayward Aqua rite not right?

Occasionally the salt level on the Hayward Aqua Rite may not match the actual salt level of the pool. If the salt cell is clean but the salt reading is off, the Aqua Rite will need to be re-calibrated. The following video will provide a guide on how to recalibrate a Hayward Aqua Rite.

How to re-calibrate a Hayward Aqua rite Turbo cell?

If there is no buildup, it’s time to re-calibrate the cell! I’ll walk you through how to do that in this post. With the pump running, take the power switch down to the “Off” position, and then back up to “Auto”. You should hear a click within 10 or 15 seconds. When you do, press the diagnostic button five times in a row.

How do I recalibrate my Hayward Pro Logic salt sensor?

With the pump running, take the power switch down to the “Off” position, and then back up to “Auto”. You should hear a click within 10 or 15 seconds. When you do, press the diagnostic button five times in a row. The system will go through a recalibration process. Wait until the numbers stop changing.

Why is my Hayward Aqua rite Turbo cell not working?

This will lock that number in as the new average salt reading. If the salt system settles on a number that is unrealistic, there may be something wrong with your system or salt cell. The most likely issue is that your salt cell needs to be replaced. It could also be that the board in your power center needs to be replaced.