How do I connect FD130 to phone line?

Connect the Terminal

Remove the cover from the bottom of the terminal.
Plug an ethernet cable (sold separately) into the yellow port, OR plug the included phone cable into the blue port.
Plug the other end of the ethernet cable into a numbered port on the router.
(Optional) Connect a PIN pad to the terminal.

How do I enable IP on FD130?

How do I configure my FD100/130/200 terminal’s static IP address?

Select TOOLS.
Tap LAN.
Tap Set IP Address.
Using the keypad, enter the IP address.
To save the IP address, press Enter (green button).
To return to the home screen, press Clear (red button) twice.

How do I turn off my first data machine?

To switch the terminal off, hold down the red X key until you are prompted with the power off option on the screen.

How do you ping FD130?

How can I test my FD100/130/200 terminal’s network connection?

Select TOOLS.
Tap LAN.
Tap Ping.
Enter a known IP address to ping if one is not already listed.
Press Enter (Green button).
To return to the home screen, press Clear (red button) three times.

How do I connect my credit card to my WIFI?

Connect one end of a RJ-45 Ethernet network cable to the “LAN,” “RJ-45” or “Network” port on the rear of the credit card machine. Connect the other end of the Ethernet cable to an open port on the broadband router connected to the DSL modem.

How do I connect my fd150 to WIFI?

How do I configure my FD100/130/200 terminal’s wireless network settings?

Select TOOLS.
Tap WiFi.
Tap Security.
Enter password (you may need to contact your service provider for the password) and select ENTER.
Tap the required security type.
Tap the required network, then using the keypad, enter the SSID.

How do I connect First Data FD130 to WiFi?

First Data FD130 – How To Connect To WIFI

Press CLEAR to return back to HOME screen.
Press ORANGE WRENCH/HAMMER (Upper Right Corner)
Press WIFI.
Press SECURITY.
Enter PASSWORD.
At this point, you will choose your security type.
Enter your key.
Enter your SSID network.

How do you manually enter a credit card?

Now, to manually accept credit card payments can vary in appearance and order depending on your provider, but generally entails these steps:

Enter the card number provided.
Enter the expiration date of the card.
Enter the amount to be charged to the account.
Enter the name of the cardholder.

What happens if you don’t batch out?

So – what happens if you don’t settle out on a daily basis, or on a day where you had authorizations? The answer is that you risk getting a “downgraded” interchange rate – essentially, you’ll pay more for the sale!

How to set up first data fd130 / fd150 credit card terminal?

First Data FD130 / FD150 Credit Card Terminal Setup 1 In the Box. The First Data FD130 and FD150 Credit Card Terminals ship with the parts listed below. 2 Connect the Terminal. Before anything else, connect the FD130 or FD150 via phone line or ethernet cable* and plug it into power. 3 Privacy Guard Installation. 4 PIN Pad Installation

How long does it take to set up a fd130?

Let’s get started Typical set-up time: 10-15 minutes Where to put the FD130 Terminal Place the terminal on a desk or tabletop. Avoid areas with direct sunlight, objects that radiate heat, excessive dust and other electrical devices that can cause excessive voltage.

How do I connect the PIN pad to my fd130 or fd150?

Remove the back cover of the FD130 or FD150 terminal, and unplug the power cable. Connect the PIN pad cable to a black USB port on the terminal. Reconnect the power cable to the FD130 or FD150, and replace the back cover. The PIN pad will turn on automatically and display Welcome Ready for Sale or Insert or Swipe Card when ready to use.

How do you use an fd130 contactless card?

The card holder will tap his or her contactless card or device against the contactless icon located on the FD130. In some cases, the device may prompt for a second tap to complete the transaction. 10 Using the keypad Through the keypad, the user can select transaction types and enter information.