How do I connect my Sena SMH10 to my computer?

Please hook up the Sena Bluetooth Device with your computer by using USB cable and then turn it on by switching SM10 on or by selecting two buttons together, which are “Jog Dial” / “Phone button” for SMH10, SMH5, SMH5-FM, SPH10, SPH10S, SPH10H, SPH10H-FM, “Center button” / “[+] button” for SMH10R and “PTT button” / ” …

How do you make Sena discoverable?

Press and hold the Phone Button for 5 seconds until you hear a voice prompt, “Phone pairing”. Search for Bluetooth devices on your mobile phone. Select the Sena 10S in the list of the devices detected on the mobile phone. Enter 0000 for the PIN.

How do I pair my Sena 10s with Cardo?

SEN | Sena SMH10. Pairing to other Bluetooth helmet kits (including Cardo)

Turn your SMH10 on (make sure you have the speakers/boom attached).
Press and hold the ‘jog dial’ until you hear the voice say ‘universal pairing mode’. Release the jog dial.
Put your secondary Bluetooth device into pairing mode.

How do I Pair my Sena smh10 with my mobile phone?

Select the Sena SMH10 in the list of the devices detected on the mobile phone. 3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 4. The mobile phone confirms that pairing has completed and the SMH10 is ready to use.

Can I connect my Sena smh10r Bluetooth headset to my Zumo 660?

When you’re in the zumo 660’s Bluetooth menu, make sure to touch the Connect Headset – Add or Change Button. If you tap “Connect Phone” on your zumo this will not work for your SMH10. I tested the Firmware-Update 4.2 , 4.2.1 and 5.0 on my Sena SMH10R

How do I pair the smh10 with the GPS using multipoint pairing?

Multipoint Bluetooth pairing allows the SMH10 to connect two HFP devices at the same time: mobile phone and GPS navigation. Follow the steps below to pair the GPS using the multipoint pairing. 1. Turn on the headset and press the Jog Dial for 5 seconds until the red LED is rapidly flashing and you hear multiple beeps.

Why does the smh10 go into stand-by mode?

If the pairing process is not completed within three minutes, the SMH10 will return to stand-by mode. You can listen to voice instruction from Bluetooth GPS navigation. Some GPS systems use mobile phone profile (HFP, Hands-Free Profile) and others use stereo music profile (A2DP, Advanced Audio Distribution Profile).