How do I connect my Xfinity X1 to my surround sound?

Enabling Dolby ATMOS on X1 Once you have connected your Dolby ATMOS compatible stereo system to your X1 TV Box via an HDMI cable, visit Settings > Device Settings > Audio > HDMI Audio Output and select Expert Mode.

How do I connect my surround sound to my TV with HDMI and cable box?

How Do I Connect the TV, Cable and Surround Sound with HDMI?

Turn off the power to all of your audio-video components.
Insert the plug at one end of an HDMI cable into the matching jack on your cable TV box.
Insert the other end of the cable into any HDMI input on the back of your surround sound receiver.

How do I get my TV to play sound through my home theater?

Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.

Does cable TV support Dolby Atmos?

Unless you are satisfied with your TV’s internal speakers, HDMI is a requirement for Dolby Atmos. If you’re using an optical cable to connect your TV to your soundbar or your AV receiver, these signals will be converted into a simpler surround format, like Dolby Digital 5.1, before they get transmitted.

How do I install 5.1 surround sound?

In a 5.1 system, your surround speakers are best placed to the left and right of your listening position. Aim them directly towards you for the best sound. If side placement isn’t practical, place your surround speakers a few feet behind your listening position and face them forward.

Where is sound output on Samsung TV?

Press the Home button on your remote, and then navigate to and select Settings. Select Sound, select Sound Output, and then select the desired sound output.

How to change the sound on a Sony TV?

How to Change Sound on Sony TV 1 On the remote control, press the HOME button. 2 Select Settings. 3 The next steps depend on your TV menu options:Select Display & Sound → Audio output → Speakers → Audio system.Select… 4 Select Display & Sound → Audio output → Speakers → Audio system. 5 Select Sound → Speakers → Audio system. See More….

Is there a 7.1 channel Sony str998?

Looks good, sounds great, and has all the features needed for a 7.1 home theater system. Last year I bought a Sony STR998 for my living room primarily for music and it has been an outstanding unit with superb sound that I am using in a 4.1 configuration. The DG800 has the same horsepower at 110 watts per channel and has similar features.

How to set up wireless surround sound on a TV?

Setup using the sound bar user interface menu. Position the two portable speakers as rear speakers of your surround sound setup. Power on your TV and set it to the appropriate HDMI input. Select Wireless Surround.

How do I connect a surround back speaker to a L terminal?

If connecting only one surround back speaker, connect it to the L(+/-) terminals. If you have an additional front speaker system, connect it to these terminal. In this case, select a speaker pattern that does not have surround back and front high speakers. Then, set [SB Assign] in the Speaker Settingsmenu to [Speaker B].

What kind of cable do I need for surround sound?

The HDMI connection supports both audio and video, hence its popularity. One cable can easily support eight channels or less for surround sound, but it will also output high definition videos with no issues at all.

How do you set up front speaker system?

You can select the front speaker system you want by using the SPEAKERSbutton on the receiver. You can connect the front speakers to these terminals using a bi-amplifier connection. In this case, set [SB Assign] in the Speaker Settingsmenu to [Bi-Amp]. Note